iFixit - Active Questions With Device "Computer Hardware"

Logitech MX Master 2S: 사용중 전원이 꺼지고, 다시켜면 수분 작동 후 꺼집니다

Wed, 23 Apr 2025 04:59:12 -0700

사용중 전원이 꺼지고, 다시켜면 수분 작동 후 꺼집니다

Logitech MX Master 3S: 스크롤 휠 상태가 고정되어있음.

Mon, 08 Jan 2024 01:02:15 -0700

초고속 스크롤 휠 상태에 고정되어

래치 모드로 변환이 안됨.

Epson Printer: Epson cs-t2100 driver does not recognize roll width

Fri, 03 Jul 2026 08:30:20 -0700

I insert a 450mm roll into the SC-T2100 plotter and the plotter recognizes it with that width. When I want to print, the drivers do not recognize that width, but set 432mm as the closest smaller width from the list in the roll paper width field and lock that field. Can that list be supplemented with a width of 450mm or possibly change some of the existing values.

Epson XP-960: Preparing to print CD/DVD everytime I try to print document

Fri, 03 Jul 2026 08:19:26 -0700

Trying to print document and every time I send to printer, message comes up

"preparing to print CD/DVD" then

"close the output tray all the way inside before inserting CD/DVD tray"

Have checked for updates all up to date.

⟐ Commented 7월 03, 2026 at 8:19 GMT-7

Intel Core i5 7400: Computer keeps restarting upon startup and never progresses further.

Fri, 03 Jul 2026 07:09:20 -0700

Sometimes it starts completely but then turns off automatically after roughly half an hour.

⟐ Answered 7월 03, 2026 at 7:09 GMT-7

Klipsch Promedia 2.1 (ORIGINAL EDITION): Why is mynspeaker overheating?

Fri, 03 Jul 2026 05:11:41 -0700

Overheating.

Epson Stylus NX240: Why can't my printer connect to my wireless network?

Fri, 03 Jul 2026 03:35:17 -0700

My printer doesn't seem to be able to find my home wireless network. When I turn my printer on, my home wireless network doesn't appear. What can I do?

⟐ Answered 7월 03, 2026 at 3:35 GMT-7

Epson Printer: Problem with recognizing the width of the roll

Fri, 03 Jul 2026 01:05:27 -0700

I have a plotter SC-T2100. When I insert a 450mm wide roll, the plotter recognizes it and measures it correctly. But when I want to print, the drivers recognize it in the roll paper width field as a roll with a width of 432 mm and that field cannot be changed. Is this possible to solve

Epson Printer: Error says paper jam, but there is not. What could cause this?

Fri, 03 Jul 2026 00:12:14 -0700

I have an Epson Artisan 837 all in one. It was working perfectly fine yesterday. Today it is telling me I have a paper jam. I went through the steps it told me to take 3 times. There is no paper jammed anywhere! Each time I finish the steps and turn it back on, it makes a grinding sound, then I get the same paper jam error message. I need some helpful advice if anyone has seen this before, please tell me what I should do.

⟐ Commented 7월 03, 2026 at 0:12 GMT-7

Intel Core i5 7400: My mecer procient cpu not loging on

Thu, 02 Jul 2026 09:09:25 -0700

Mecer CPU not login on,

Epson Printer L6170: My printer keeps printing blank pages and gives a paper size error

Thu, 02 Jul 2026 06:26:21 -0700

My printer keeps printing blank pages and gives a paper size error, how to fix it?

1、The paper size settings match on both the computer and the printer.

2、This issue happens randomly—sometimes on the very first page, and sometimes in the middle of a print job.

3、I have already replaced the pick-up roller, but the error persists. It still randomly prints blank pages and reports a paper size mismatch.

Now I heavily suspect it is an issue with the PE sensor (registration sensor) or its return spring. Any advice on how to clean or replace the sensor spring for Epson ET-3750?

Computer Hardware: Dirt entered through fan

Wed, 01 Jul 2026 09:22:06 -0700

There is some dirt that has entered my system through the fan in my laptop how to fix it

Epson Printer: Epson Expression Home XP-5200 - Error 100016

Wed, 01 Jul 2026 05:47:41 -0700

Hello, I just bought an Epson Expression Home XP-5200 from a seller on eBay, and it arrived with the mentioned fault. I notified the seller, and they refunded me and told me to keep the printer.

I have now looked up this error and found many fixes.

Here is what I have tried so far.

1) Removed power cable while printer on, waited 60 sec, held power button for 30 secs, plugged power cable back in

Outcome: Ran printer, same issue.

2) Removed the side cover, unplugged the two ribbon cables nas the reseated the, the smaller one with the blue tab facing down, and the larger one with the blue tab facing up.

Outcome: Ran printer, same issue

3) Removed the scanner completely, opened the scanner and checked all cables. Moved the carriage over to the middle, gave everything a clean, and put it all back together.

Outcome: Ran printer; scanner carriage moved to the start position, then the error code appeared again.

Now, one of the suggested fixes for these issues is a firmware update; however, the error screen will not let me do anything. I can't reset the printer, which was another suggestion. I have no ink in the printer, which was another suggestion for the error code, but I still have no way to bypass the error screen.

So, please, if anyone knows how or if I can bypass the error screen, I may be able to reset the printer. Or is this just a brick destined for land fill (recycle)

⟐ Answered 7월 01, 2026 at 5:47 GMT-7

Canon Printer: Printer stopped working Error B203

Wed, 01 Jul 2026 02:11:15 -0700

Printer stopped working

Support code B203 says to turn off printer and contact service centre.

An extended period turned off allowed it to print a few pages before error B203 again.

This only worked once.

Is there any at home fix.

⟐ Answered 7월 01, 2026 at 2:11 GMT-7

epson l3150: Black Ink Not Printing on Epson L3150 Printer After Refilling Cartridg

Wed, 01 Jul 2026 01:09:04 -0700

I have an Epson L3150 printer that stopped printing black ink after the cartridge ran out. I refilled the cartridge manually, but the printer still doesn't print in black. I have tried cleaning the print head several times, but it didn't solve the problem. The printer prints in other colors normally. Could you please help me troubleshoot and fix this issue?

⟐ Commented 7월 01, 2026 at 1:09 GMT-7

Bambu labs P1S 3d printer: My bed wont go home

Tue, 30 Jun 2026 15:32:17 -0700

the bed wont go home it move a little ,, the jumping up and down.. but wont let me move it manyaly wit the contgrols.. says it need to go hoem wont do it

Asus Motherboard: I Hurd a loud Ballon Pop

Tue, 30 Jun 2026 14:45:27 -0700

I was just casually playing and this pc is Farley new im guessing my capacitor blew out ? I Hurd a loud pop and don’t know exactly what it could have been or how to fix anything suggestions pleaese

⟐ Commented 6월 30, 2026 at 14:45 GMT-7

Canon G3010 Printer: How to fix P22 error

Tue, 30 Jun 2026 12:23:34 -0700

How to fix P22 error

⟐ Answered 6월 30, 2026 at 12:23 GMT-7

Canon PIXMA MP480: How to reset page counter for ink absorber full (error 5B00)?

Tue, 30 Jun 2026 05:19:26 -0700

I have been trying everything I can find on google and youtube (short of downloading a sketchy exe file), but I can't reset the page counter. I already cleaned out the ink absorber pads, but my printer won't print until this has been reset. I hate planned obsolescence.

⟐ Commented 6월 30, 2026 at 5:19 GMT-7

Logitech MX Anywhere 3: Click is not working

Tue, 30 Jun 2026 02:14:40 -0700

Hello everyone!

Well, I have MX Anywhere 3 and I have now this issue: left side is not clicking. You need a stronger click/click in a precise spot of this side of the mouse to make the click work. I have this product for more than 5 years now. I saw there are some videos about how to fix it at home... and I am a bit afraid buying the tools/paying someone to fix it and then having the issue again...
Do you guys have any tips or instructions that I could follow to solve this problem? Have you faced this problem as well? Is really worth fixing it?

Thank you very much.

⟐ Commented 6월 30, 2026 at 2:14 GMT-7