Can the speakers be replaced? If so, where do I buy them? What's the cost and how do I replace them exactly?

Thanks,

Ross

⟐ Answered 6월 17, 2023 at 14:33 GMT-7

Thanks. I sent the computer to HP and they replaced the motherboard.

⟐ Commented 3월 31, 2023 at 2:33 GMT-7

While I am not opposed to installing an SSD, the version I have is pretty abysmally specced (A10-4655M/8GB DDR3L - hard to access/15” 768p TN LCD/Realtek wireless/1TB HD - Samsung ST Spinpoint), so the specs are a pretty serious negative on this one. I even tried to use it once and I hung it up again when it took 10 minutes to startup fully; I was tired of waiting.

How much will an SSD help this laptop? Like I said, not opposed but the CPU and overall performance was pretty bad at the time, so I was hesitant to do so after that.

⟐ Commented 3월 29, 2022 at 3:24 GMT-7

⟐ Commented 5월 24, 2017 at 9:32 GMT-7

i recently purchased this laptop on craigslist and when i received it the finger scanner is on. so now i am unable to enter the laptop because it's asking for the password and or finger to be swipped. the person whom i bought from just said is now M.I.A- missing in action!

so if someone can help me or direct me that would be greatly appreciated.

thanks!

edie

⟐ Answered 12월 01, 2011 at 17:19 GMT-7

For specifications, this is the specific model: HP Pavillion x360 Convertible 15-cr0xx.

Thank you for your time.

Edit: I wasn’t so specific in my question, so i’ll add some extra details. The part that needs replacing is the back of the LCD screen. Also. this is the best image i can find of the damage

⟐ Commented 2월 16, 2025 at 17:54 GMT-7

HP Pavilion 15-p002la

AMD Quad-Core A8-6410

realtek rtl8723be 802.11 bgn wi-fi adapter 1x1

⟐ Commented 1월 27, 2025 at 9:50 GMT-7

⟐ Answered 5월 01, 2024 at 17:01 GMT-7

Toshiba 55"..HP Pavilion 1150us G series

⟐ Commented 4월 03, 2024 at 3:19 GMT-7

⟐ Answered 10월 24, 2023 at 10:54 GMT-7

⟐ Answered 8월 25, 2023 at 6:49 GMT-7

⟐ Answered 6월 18, 2023 at 7:45 GMT-7

⟐ Commented 7월 14, 2022 at 2:19 GMT-7

⟐ Answer accepted 3월 04, 2021 at 15:06 GMT-7

⟐ Answered 10월 10, 2020 at 17:42 GMT-7

This device will not power on, or give fan spin when the power button is pressed, the ac adapted is working properly it has been tested. I have also removed the CMOS and tried powering on nothing worked. I then went and found the board schematics and tested multiple points on the motherboard itself and it seems to be receiving power properly across the board, the DC IN board is receiving power properly but still nothing happens when the power button is pressed. Any thoughts would be greatly appreciated.

⟐ Answer accepted 6월 04, 2020 at 9:38 GMT-7

I have 2 SSD drives I want to install into my laptop with a fresh copy of Windows 10 Pro,

My question is which one to put in the caddy. One SSD is 500 GB the other is 120 GB.

I also upgraded my RAM from 4 GB ( 2 GB x 2 sticks ) to 16 GB ( 8 GB x 2 sticks ) if that make a difference. I appreciate your advice and thank you for your time.

⟐ Commented 5월 08, 2020 at 20:01 GMT-7

⟐ Answered 2월 12, 2020 at 17:35 GMT-7

So I decided to clean the heating fan on my laptop after it was making noise (hp G7-1167x). After about 3-4 hours I disassembled, cleaned, and reassembled it. It was a pain in the ass (first time ever working on a computer). However when I turned it on, the computer powers on, beeps for a minute or less, and the screen is black, the caps lop button flashes too. The only things I can really think of is

- I didn't put electrical tape that I took off on the connectors. though this doesn't explain the beeping, or why the screen is black, unless I was supposed to put it on the screen LCD connector maybe.

-a couple of the Ribbons had a line you line up and slide into a bracket and close it. I lined them up as best as I could, but a couple would stay just a little bit outside the bracket without going in, it was impossible to push them any further in.

-I had trouble putting the ram (I think it's the ram, it's right by the Card, rectangular piece) I'm not sure I put it back in right. Could this have caused it?

-I somehow damaged the computer possibly. Didn't have tools.I had a crappy philip screwdriver and no plastic pry tools. I know not to use metal on connectors even if it's turned off, so I avoided it as best as I could but a couple t imes I did take out connector with a metal pry tool. I was very careful and took out the battery first.

-there was a small piece I broke on the top left, so I took it out and a metal plate by the LCD it was screwed into, because it wouldn't fully close the housing since it was broken. Though I don't see how this affect it. I'm pretty positive I didn't damage the LCD, I didn't really touch if, and there's no likes or anything it's all black.

could I have damaged a backlight?

⟐ Answered 11월 06, 2018 at 15:27 GMT-7

⟐ Answered 8월 05, 2018 at 16:02 GMT-7