<![CDATA[iFixit - Answers With Device "Household"]]> https://ko.ifixit.com/Answers/Device/Household/All?rss=yes en-US Tue, 28 Jul 2026 08:24:03 -0700 <![CDATA[Globe: Replogle Vintage Globe Repair]]> I found an old Replogle globe from a thrift shop. I always wanted to have one, and despite it being old, and in a language I cannot even read or speak, I am happy.

My issue is that the globe does not spin freely, because the globe seems to be sitting lower than usual at the bottom.

Block Image

How does one remove the spindle (metal rod running through the center) on one of these? If I could safely remove the spindle (without any further damage to it), then maybe I can insert a plastic bushing to make the globe spin freely again? When I raise the globe, (like with my finger there) it spins freely. So I think the globe sits too low and there must be something missing. Or it could be something else. Maybe something on the inside?

Block Image
Block Image

Or, if you have another suggestion and maybe have seen this issue before I would appreciate a fix here!

Thanks a lot in advance!

⟐ Answered 7월 28, 2026 at 0:02 GMT-7

]]> https://ko.ifixit.com/Answers/View/803552/Replogle+Vintage+Globe+Repair https://ko.ifixit.com/Answers/View/803552 Tue, 28 Jul 2026 00:02:23 -0700 <![CDATA[Household: Toilet handle doesn’t work]]> When you push down on toilet handle, nothing happens

⟐ Commented 7월 27, 2026 at 11:57 GMT-7

]]> https://ko.ifixit.com/Answers/View/965671/Toilet+handle+doesn%E2%80%99t+work https://ko.ifixit.com/Answers/View/965671 Mon, 27 Jul 2026 11:57:02 -0700 <![CDATA[Korg B1: Korg B1 - specific notes don't work, problem with circuitry]]> Aloha all, I just purchased a Korg B1 digital piano with known issues. The keyboard sounds great but has specific notes that don’t work. Starting from the E after middle C, all Es, Cs and G#s don’t work.

Luckily, I found another ifixit post, the only place on the internet it seems, where someone understood why specific notes wouldn’t be working. Here is the link: ++"E" key and 3rd black key is not working.

I understand very little about circuit boards, but I was able to identify the problem immediately. C, E and G# receive and give inputs along the same path. There is an issue with the soldering on one of the *things* at the first E key, where the problem starts. See the images for this issue.

Block Image
Block Image
Block Image

So, one of my problems is that I don’t know anything about circuits or circuitry terminology, so I can’t even describe this issue, much less start to fix it.

Can anyone help me at least put a name to this, so I can start to go about fixing it? It seems like a basic circuitry issue that wouldn’t be hard to fix, but I don’t know where to start. Any help is appreciated.

⟐ Commented 7월 26, 2026 at 16:42 GMT-7

]]> https://ko.ifixit.com/Answers/View/655548/Korg+B1+-+specific+notes+don't+work,+problem+with+circuitry https://ko.ifixit.com/Answers/View/655548 Sun, 26 Jul 2026 16:42:46 -0700 <![CDATA[Sewing Machine: Janome sewing Maschine RE1306]]> Can any one tell me how to open the frontcover. i got the back cover off, with great dificultis, but the front seems to hang on one one more position………….Thanks everyone

⟐ Answer edited 7월 25, 2026 at 18:16 GMT-7

]]> https://ko.ifixit.com/Answers/View/548042/Janome+sewing+Maschine+RE1306 https://ko.ifixit.com/Answers/View/548042 Sat, 25 Jul 2026 18:16:23 -0700 <![CDATA[Yamaha P115: Keys Suddenly Not Sounding]]> Hi. The Db and G keys in the upper octaves (6 and 7) of my P115 are suddenly not sounding. Any ideas how to fix them?

⟐ Commented 7월 25, 2026 at 12:03 GMT-7

]]> https://ko.ifixit.com/Answers/View/626258/Keys+Suddenly+Not+Sounding https://ko.ifixit.com/Answers/View/626258 Sat, 25 Jul 2026 12:03:05 -0700 <![CDATA[Wahl Hair Clippers: How to repair damaged wires]]> How to repair damaged wires

⟐ Answered 7월 25, 2026 at 10:09 GMT-7

]]> https://ko.ifixit.com/Answers/View/893051/How+to+repair+damaged+wires https://ko.ifixit.com/Answers/View/893051 Sat, 25 Jul 2026 10:09:32 -0700 <![CDATA[BRICOLAJE DOMESTICO: Why has my front door’s handle won’t move or let me put the key in it?]]> My front door handle is like frozen, won’t turn, can’t get the key in it.

]]> https://ko.ifixit.com/Answers/View/965331/Why+has+my+front+door%E2%80%99s+handle+won%E2%80%99t+move+or+let+me+put+the+key+in+it https://ko.ifixit.com/Answers/View/965331 Sat, 25 Jul 2026 08:38:54 -0700 <![CDATA[Kite: How to make a new kit]]> How to make new kit

⟐ Answer edited 7월 25, 2026 at 5:57 GMT-7

]]> https://ko.ifixit.com/Answers/View/965289/How+to+make+a+new+kit https://ko.ifixit.com/Answers/View/965289 Sat, 25 Jul 2026 05:57:49 -0700 <![CDATA[Mini muscle massage gun: When I give pressure it get off automatically]]> When I give pressure it get off automatically

]]> https://ko.ifixit.com/Answers/View/965286/When+I+give+pressure+it+get+off+automatically https://ko.ifixit.com/Answers/View/965286 Sat, 25 Jul 2026 03:08:51 -0700 <![CDATA[Theragun Elite: Anyone completed a battery repair/replacement?]]> Anyone completed a battery repair/replacement?

Mine has just stopped taking charge.

Oh, the on button is broken as well...

EDIT:

It's the Theragun Elite (https://www.therabody.com/uk/en-gb/elite...) from a few years back - there is no swappable battery. Will post pictures tomorrow.

EDIT 31/12/2024

Still not completely given up and still massively encouraged and grateful for commenters so far - thank you.

Found this page that shows the battery in question but I can't read the langauge so no idea...I can't find a replacement battery, sadly.

10.8V锂电池组，6V电源适配器，数显光纤放大器 - 〓器材友情交换〓 - 矿石收音机论坛 - Powered by Discuz!

Update (12/31/24)

Theragun Elite (white) pictures to support recent teardown efforts.

Still not found a battery source.

Block Image
Block Image
Block Image
Block Image
Block Image

⟐ Commented 7월 24, 2026 at 5:07 GMT-7

]]> https://ko.ifixit.com/Answers/View/773924/Anyone+completed+a+battery+repair-replacement https://ko.ifixit.com/Answers/View/773924 Fri, 24 Jul 2026 05:07:34 -0700 <![CDATA[Sewing Machine: My drop in cam are not seeing the pattern. Montgomery wards 21 Jewel]]> My drop in cam are not sewing the pattern. Montgomery wards 21 Jewel. I took apart the width knob and I may not have put it Mack together properly

]]> https://ko.ifixit.com/Answers/View/965084/My+drop+in+cam+are+not+seeing+the+pattern.+Montgomery+wards+21+Jewel https://ko.ifixit.com/Answers/View/965084 Thu, 23 Jul 2026 11:03:03 -0700 <![CDATA[Petcube Bites: Why is the launching mechanism not flinging treats?]]> I have the black Petcube bites. The wheel is spinning to drop treats into the launching compartment but the little paddle that launches the treats out is not moving at all. It sounds like a gear keeps spinning and then just stops. There is no treats stuck behind the flinger from the bottom trap door. I am using the recommended Blue Buffalo Blue bits dog treats.

⟐ Answered 7월 23, 2026 at 4:33 GMT-7

]]> https://ko.ifixit.com/Answers/View/629383/Why+is+the+launching+mechanism+not+flinging+treats https://ko.ifixit.com/Answers/View/629383 Thu, 23 Jul 2026 04:33:22 -0700 <![CDATA[Fender Starcaster: Which pick guard did this particular instrument use]]> I need to replace the pick card which one do I buy

]]> https://ko.ifixit.com/Answers/View/965003/Which+pick+guard+did+this+particular+instrument+use https://ko.ifixit.com/Answers/View/965003 Thu, 23 Jul 2026 00:10:37 -0700 <![CDATA[Household Item: Ventilation fan isn’t working when power on]]> Ventilation fan isn’t working when power is on?

⟐ Commented 7월 22, 2026 at 15:07 GMT-7

]]> https://ko.ifixit.com/Answers/View/964921/Ventilation+fan+isn%E2%80%99t+working+when+power+on https://ko.ifixit.com/Answers/View/964921 Wed, 22 Jul 2026 15:07:45 -0700 <![CDATA[Household: How to repair a hole in vinyl siding]]> I have vinyl siding with a 2 inch hole, can I patch it?

⟐ Answered 7월 21, 2026 at 18:38 GMT-7

]]> https://ko.ifixit.com/Answers/View/964831/How+to+repair+a+hole+in+vinyl+siding https://ko.ifixit.com/Answers/View/964831 Tue, 21 Jul 2026 18:38:02 -0700 <![CDATA[BRICOLAJE DOMESTICO: Toilet Water tank level is low]]> The toilet tank water is too low and you need to hold the handle down to flush

⟐ Answered 7월 21, 2026 at 15:57 GMT-7

]]> https://ko.ifixit.com/Answers/View/964819/Toilet+Water+tank+level+is+low https://ko.ifixit.com/Answers/View/964819 Tue, 21 Jul 2026 15:57:18 -0700 <![CDATA[Singer Brilliance 6180: How to disassemble machine to adjust timing]]> Timing is off by hitting the foot multiple times I disassemble the machine but back side is not separating even I have removed all screws whichever I can see

⟐ Answered 7월 20, 2026 at 18:55 GMT-7

]]> https://ko.ifixit.com/Answers/View/964709/How+to+disassemble+machine+to+adjust+timing https://ko.ifixit.com/Answers/View/964709 Mon, 20 Jul 2026 18:55:33 -0700 <![CDATA[Casablanca W-11 Wall Control: Selling fan suddenly completely run stop]]>
  • My ceiling fan has completely ceased to rotate.

    • ⟐ Answer accepted 7월 20, 2026 at 7:19 GMT-7

    ]]>     https://ko.ifixit.com/Answers/View/955074/Selling+fan+suddenly+completely+run+stop https://ko.ifixit.com/Answers/View/955074 Mon, 20 Jul 2026 07:19:46 -0700     <![CDATA[Theragun: Theragun Pro fourth generation battery ko.]]> Hi everyone,

    I own a Theragun Pro, and unfortunately the batteries no longer charge. The charger is working properly, so the problem is the internal batteries in the battery compartment.

    Can anyone give me advice on how to open the battery compartment to replace the internal batteries without causing any damage?

    I'd be sad to no longer be able to use the massager, since it still works perfectly.

    Thanks to anyone who can help.

    ⟐ Commented 7월 19, 2026 at 11:19 GMT-7

    ]]>     https://ko.ifixit.com/Answers/View/952654/Theragun+Pro+fourth+generation+battery+ko. https://ko.ifixit.com/Answers/View/952654 Sun, 19 Jul 2026 11:19:07 -0700