iFixit - Answers With Device "Jura"

Jura: Won’t make coffee

Wed, 30 May 2018 01:35:53 -0700

My machine is 7 months old

I use filtered water. Never been prompted for de scale. Water runs on hot water and clean syaytem but when prompted to make coffee only a few dribbles then stops

⟐ Answered 5월 30, 2018 at 1:35 GMT-7

Jura Impressa C E F Modelle: Pump works, water level goes down, but coffee grounds are dry

Tue, 10 Feb 2026 00:40:10 -0700

Pumps water onto try, grounds stay dry , no liquid out of the spouts

⟐ Answer edited 2월 10, 2026 at 0:40 GMT-7

Jura E8: Leaking water at bottom front right corner

Thu, 18 Sep 2025 14:38:20 -0700

What is the source of this leak, and can it be repaired?

⟐ Commented 9월 18, 2025 at 14:38 GMT-7

Impressa A9: How to remove the cover plate?

Sun, 31 Aug 2025 14:18:45 -0700

Hello,

is there a tool or a trick to remove the cover plate.

It is too slippy to make it rotate counter clockwize by hand.

Thank you

⟐ Commented 8월 31, 2025 at 14:18 GMT-7

Jura Impressa F50: It's saying drip tray not fitted

Wed, 02 Jul 2025 02:39:26 -0700

It was pulled apart and put back together a screw was misplaced and now it's saying drip tray not fitted error, unsure where the screw went or came from just know that 1 is missing. What screws missing could cause this error directly?

⟐ Commented 7월 02, 2025 at 2:39 GMT-7

Jura ENA micro 9: My Ena 3 is no longer alerting when coffee grounds container is full

Thu, 03 Apr 2025 06:33:16 -0700

Everything is working well with my Ena 3 old machine except that now the alert is no longer working when the Coffee grounds container is full. Does anyone have some ideia ?

⟐ Commented 4월 03, 2025 at 6:33 GMT-7

Jura E8: Machine quit sucking water at end of descale program

Tue, 11 Mar 2025 12:23:48 -0700

Jura quit sucking water at end of descale cycle

⟐ Answered 3월 11, 2025 at 12:23 GMT-7

Jura: Jura Z6 Rinse Cycle Issue After Deep Clean – Need Advice

Mon, 24 Feb 2025 06:57:08 -0700

Hey everyone,

I recently did a deep clean on my Jura Z6, including taking apart and reassembling the brew unit and grinder. Everything seems to be working well—coffee brews perfectly, hot water dispenses fine, and the milk system rinses without issue.

However, I’ve noticed that during the startup rinse or when selecting Machine Maintenance → Rinse Machine, no water comes out of the coffee spouts. Instead, it seems to bypass them and go straight into the drip tray. Oddly enough, the cleaning cycle does work through the spouts/nozzles.

Has anyone encountered this before? Any ideas on what might be causing the rinse water to divert internally instead of flowing through the spouts? Appreciate any insights!

⟐ Commented 2월 24, 2025 at 6:57 GMT-7

Jura ENA micro 9: Power supply, problems with starting.

Wed, 22 Jan 2025 03:11:08 -0700

Hi, we have som problems with our machine. At first there was problems with coffie grinder, but we tok it apart and cleand it, but now machine doesn't want to start at all. At firts it started, but came message that lid for coffie beans are not closed and went off. My girfriend noticed before too unexpected turned offs.. now it doesn't want to turn on att all. you just hear click sound and that's all. Any ideas?

⟐ Answered 1월 22, 2025 at 3:11 GMT-7

Jura ENA micro 9: JURA ENA9 continuous show message ‘fill watertank’

Tue, 14 Jan 2025 10:37:50 -0700

My JURA ENA9 continuous show message ‘fill watertank’.

Floater already checked - is good and floats/moves.

Appreciate any expert advice where to look for, which part to replace.

⟐ Answered 1월 14, 2025 at 10:37 GMT-7

Jura: I Have a Jura Impressa F8 TFT...No water coming from brew unit

Sat, 26 Oct 2024 07:35:47 -0700

I screwed something up and I cannot figure it out. My machine was getting error 8 so I was replacing all the o-rings in the brew group. I believe I setup back to how it was (I have done it before without issue). Upon reassembly, I go and turn on the unit and it goes through the initialization without issue moving up an down the unit. It then asks rotary button to pushed to rinse machine. Upon doing so, it goes through the process but everything is going to the drain tray. If I then choose an espresso, it goes through but brews to the drain tray.

I have checked the drain stepper motor and is functioning properly. I have tried manually pushing the drain valve during the process and still goes directly to the drain. I have disassembled the brew group again to ensure I put back together properly and in the right way. I have done similarly to the drain valve assembly. I blow through all hoses without issue when valve is open. It makes hot water without an issue out the steam valve. The water is moving and I don't believe there are any blockages or hose or o-ring issues.

Please help if you have an idea. Thanks...

⟐ Answered 10월 26, 2024 at 7:35 GMT-7

Jura Impressa C E F Modelle: Error 8 or Error 6 message?

Wed, 16 Oct 2024 01:22:17 -0700

What type of problems are related to Error 8 and Error 6 messages?

⟐ Answer accepted 10월 16, 2024 at 1:22 GMT-7

Jura: Why does my machine say empty tray when it is empty.

Fri, 19 Apr 2024 05:12:49 -0700

My S7 display says empty tray but it is empty. And the display won't change. I tried to unplug and let sit for awhile. Doesn't help

⟐ Answered 4월 19, 2024 at 5:12 GMT-7

Jura Z7: Water in and on drip tray

Thu, 22 Feb 2024 11:36:49 -0700

I am trying to repair a (1^st gen) Jura Z5 Impressa coffee machine and I hope anyone can help. I've found the online repair guides which have been very helpful but I'm unable to find a fix for my problem. So far I've taken apart the brew group and replaced the rings; I replaced the entire drainage valve. I've also cleaned and partially replaced the outlet valves and decalcified and cleaned the machine using tablets. The machine works and the coffee is fine but I feel that there's a lot of (brown) water in and on the drip tray. Also, I noticed that during decalcifying, no water came out of the outlet but it did make a sound. Does anyone have any suggestions?

⟐ Commented 2월 22, 2024 at 11:36 GMT-7

Jura Impressa C E F Modelle: Steam wand knob pops off during cycle

Sun, 19 Nov 2023 09:47:35 -0700

I am having a problem with the Jura e8 15270.

The metal piece with plastic end cap shoots off into the cup during and milk drinks. Could a gasket be missing?

I have taken the piece off and cleaned it with water. It does not feel right on the machine when re installed.

I have had this machine with light daily use for 3 years.

⟐ Commented 11월 19, 2023 at 9:47 GMT-7

Jura Capresso IMPRESSA J5: How do I force my Jura to descale

Fri, 02 Jun 2023 09:20:17 -0700

I accidentally descaled with sugar instead of citric acid. Now my machine is not prompting me to descale, but I still need to Descale it.

⟐ Answered 6월 02, 2023 at 9:20 GMT-7

Jura: jura s9 not brewing strong enough coffee

Mon, 09 Aug 2021 12:29:31 -0700

my coffee maker is brewing only watery coffee

⟐ Answered 8월 09, 2021 at 12:29 GMT-7

Jura Impressa S85: How do I fix a Malfunction 8?

Tue, 03 Aug 2021 10:56:53 -0700

I turn on the coffee maker a I get a Malfunction 8 message? I would like to fix this myself but don’t know how.

⟐ Answered 8월 03, 2021 at 10:56 GMT-7

Jura: My Jura A1 espresso machine’s start button is bugging

Thu, 13 May 2021 13:36:16 -0700

When I want to start the machine, I need to push at least 20 times the start button. Each time I click the display turns on, but the start-up process is not ignited. On the contrary when I click to shut down the machine the button reacts immediately.

I already changed the start-up button, but that did not work out. It seems to be an electrical problem on the circuit board. Anyone encountered the same problem? Can I replace the mother board of the machine? Where could I buy this?

⟐ Commented 5월 13, 2021 at 13:36 GMT-7

Jura Capresso IMPRESSA J5: Espresso function has stopped working

Fri, 08 Jan 2021 16:32:55 -0700

When I press the single shot espresso button it grinds beans and starts to dispense then quits after only a couple of seconds. I have tried shutting off the machine, but nothing thus far has fixed the problem. It will still make a cup of coffee, but not espresso. Advice please.

⟐ Answered 1월 08, 2021 at 16:32 GMT-7