⟐ Answered 8월 07, 2023 at 5:20 GMT-7

화면은 나오는데 더 이상 진행되지 않습니다.

방금 보드를 분리하여 memory를 완전히 분리한 뒤 테스트 해봐도

같은 증상 입니다.

어떤 문제가 있는 것일까요?

⟐ Commented 5월 05, 2022 at 22:44 GMT-7

Hello. I am John Schindler.

I replaced the battery of my MacBook Pro today, but a 'service recommended' message appears.

In the Coconut Battery program, the battery life is 100% and there are no problems.

Is there any way to solve the symptom of this problem?

Korean

안녕하세요. 저는 존쉰들러입니다.

오늘 맥북프로 배터리를 자가교체를 했지만, '서비스 권장됨' 안내표시가 뜹니다.

코코넛 배터리 프로그램에서 배터리 수명이 100%이고 별 문제가 없어보입니다.

이 문제의 현상을 해결할 수 있는 방법이 있습니까?

image

My display backlight was working perfectly just a day ago, but ever since I connected the display into another MacBook I was testing the backlight completely stopped functioning. I already swapped the small cable that connects the display board with the logic board and have also tried SMC/PRAM reset without luck. Connecting another display to the MacBook shows nothing either (this screen was untested however). Any help?

⟐ Answer accepted 7월 25, 2026 at 12:01 GMT-7

I got a 2017 13” MacBook Pro online for parts. The fans gradually ramp up and spin at full speed when plugged in. The trackpad connector was ripped off of the board and there is no ssd. Water damage indicators are also red, but no visual marks or stains. I get no image on the display, caps lock key does not light up when I press it. When unplugged, the system immediately shuts down. Any help?

⟐ Commented 7월 25, 2026 at 8:46 GMT-7

I have everything you need (or so I think) to use my imac lcd panel (panel LM240WU2 ( SL) ( B4 ) ) as a monitor for other pc

http://i62.tinypic.com/112e876.jpg

http://i61.tinypic.com/2mwxct2.jpg

also I connect the cable from the inverter to the lcd

this http://i59.tinypic.com/f10dts.jpg to http://i57.tinypic.com/f2itxd.jpg

Connect the power cord from the iMac ( white ) energy to the panel. and I connect the power adapter to the board vga 12V 2A

but does not work , connect via a PC to give vga video signal and does not work

do I wrong ?

Help please :(

⟐ Answer edited 7월 25, 2026 at 5:17 GMT-7

⟐ Commented 7월 24, 2026 at 12:23 GMT-7

I have now created a flash drive with Mac OS El Capitan on it, but when I start the machine and hold down Alt on my keyboard, it boots straight into Mint and does not let me select the installer USB.

Any idea what's going on?

⟐ Answered 7월 24, 2026 at 10:34 GMT-7

⟐ Commented 7월 24, 2026 at 6:01 GMT-7

Troubleshooting steps - I've basically done everything software wise, so I know it's hardware. Chat GPT seems to believe it's the backlight fuse that may have blown due to liquid entering.

Anyone have a hunch on what's happening? I know liquid is difficult, as I've actually worked at an Apple Store as a technician. This was a used purchase and I'd rather not spend a whole lot fixing it, but I'd like the backlight to work.

I do not have soldering equipment or a microscope, but I'm comfortable disassembling and stuff at home (I've replaced thousands of phone batteries and displays, and I build computers as a hobby). Thanks!

⟐ Commented 7월 24, 2026 at 4:04 GMT-7

I’m looking for a board-level diagnosis for my MacBook Pro Retina 15” Mid 2015 (A1398).

Configuration

• Intel Core i7
• 16 GB RAM
• macOS Monterey 12.7.6

History

Before repair:

• The original internal display was cracked but still displayed an image.
• The Mac worked perfectly with an external HDMI monitor.

During repair:

• A technician installed a display from a MacBook Pro 2013.
• The replacement display never worked.
• He reinstalled my original cracked display.
• Since then, the internal display has been completely black.

Current behavior

If the internal display cable is disconnected:

• Apple logo appears on the external HDMI monitor.
• Startup Manager (Option key) works.
• Internet Recovery works.
• But when booting from Macintosh HD, Recovery, EFI Boot or a bootable USB, the Apple logo appears, then the screen goes completely black.

If the internal display cable is connected:

• The internal display remains completely black.

The Mac appears to continue running:

• keyboard backlight works,
• volume keys work,
• fans operate normally,
• but there is no video output.

Already tried

• NVRAM reset
• SMC reset
• Safe Mode
• Internet Recovery
• Bootable USB installer
• OpenCore Legacy Patcher

Always the same result:
Apple logo → black screen.

Verbose mode also showed messages including:

• device is not readable
• failed to initialize volume keybag

Questions

1. Could installing a 2013 Retina display on a 2015 A1398 have damaged the LCD connector or another logic board component?
2. Which is the most likely cause?
   • LCD connector
   • LCD power/backlight circuit
   • Display cable
   • GPU
   • SSD/APFS
   • Logic board
3. What measurements or board-level tests would you perform before replacing parts?

Any advice would be greatly appreciated. Thank you.

⟐ Commented 7월 23, 2026 at 13:03 GMT-7

⟐ Answered 7월 22, 2026 at 20:47 GMT-7

Also, is this cable bad?

Edit to add area after cleaning with IPA:

⟐ Commented 7월 22, 2026 at 19:50 GMT-7

Here see the horizontal lines in the Finder icon.

⟐ Commented 7월 22, 2026 at 11:41 GMT-7

I recognize that this swelling is a potential fire hazard.

Further information: The battery is a TIS 2217-2548 Apple South Asia (Thailand) Limited Product, Lithium Ion Polymer Battery

Another question: Will the Magic Trackpad 2 operate with the battery disconnected or removed as long as it is plugged into my MacBook system?

⟐ Commented 7월 22, 2026 at 2:02 GMT-7

⟐ Answered 7월 21, 2026 at 18:32 GMT-7

It turns on, fan spins, but that is it nothing else happens.The sleep light is on.

I have tried, removing RAM, Swapping RAM, Without the KB connected, Without a display, different HDD / SSD, Different working HDD cable, Reset SMC, PRAM etc..... Board looks clean, no water damage evident. Owner siad it just wouldn't start anymore. It does charge the battery though.

⟐ Commented 7월 21, 2026 at 15:42 GMT-7

Observations:
macOS (all versions) detects and recognises the monitors, as in the screen flickers and recognises the brand and supported modes (within adapter limits)
Same goes to the pre-boot environment
Windows does not see the external display even after manual detection. Sometimes after reboot the integrated graphics in Windows is disabled due to a problem, re-enabling it brings back proper graphics but external monitor output is still not working or being detected.
All the adapters I've bought show the MacBook Air, not the MacBook Pro, although I've seen a review of someone using it on a 2012 Unibody MacBook Pro
A while back I had a different MacBook Pro model, still 2011 but the Early 2011 one, with the Core i5 instead of the Core i7. I was given a mini DisplayPort to VGA adapter and same symptoms, macOS and preboot environment sees it, but no display out. I was told by the person that gave the adapter to me that they use it on their 2015 MacBook Air just fine with no problems.

Is there like a common fault or difference with these Unibody MacBook Pros with how they handle that specific port and why it seems to be temperamental with cheap adapters? I haven't tried the adapters I've had since other than specific Lenovo ThinkPad laptops and MacBook Airs, I haven't had the opportunity to try them.

I want to try one of the more expensive adapters but I don't want to spend money on something that is not guaranteed to work.

Let me know if there's anything I could do.

⟐ Commented 7월 21, 2026 at 5:08 GMT-7

As described in the title I can only charge my MacBook Air 2020 with an old (extremely slow) USB-A to C charger, I don't exactly know when the issue started because this MacBook was gifted to me not too long ago, but I think there were some smaller issues with charging prior to this one.

If anyone has any insight, it would be strongly appreciated!

⟐ Commented 7월 21, 2026 at 5:04 GMT-7

⟐ Answered 7월 20, 2026 at 16:54 GMT-7