iFixit - Answers With Device "Mouse"

Logitech MX Master 2S: 사용중 전원이 꺼지고, 다시켜면 수분 작동 후 꺼집니다

Wed, 23 Apr 2025 04:59:12 -0700

사용중 전원이 꺼지고, 다시켜면 수분 작동 후 꺼집니다

Logitech MX Master 3S: 스크롤 휠 상태가 고정되어있음.

Mon, 08 Jan 2024 01:02:15 -0700

초고속 스크롤 휠 상태에 고정되어

래치 모드로 변환이 안됨.

Logitech MX Anywhere 2s: My right click is stopped working.

Sun, 02 Aug 2026 07:19:52 -0700

I was using it casually when I pressed the button and it didn’t work and it didn’t click.

⟐ Answered 8월 02, 2026 at 7:19 GMT-7

Logitech MX Vertical: MX Vertical Optical Repair

Tue, 28 Jul 2026 08:50:05 -0700

Hi there, my MX Vertical isn’t moving the cursor anymore.. However, the buttons still work (e.g., left/right click, wheel, fwd/back, etc.). Does anyone know of a way to repair this?

Is the optical sensor easy to replace? Could this perhaps just come loose?

Any experience with this issue would be greatly appreciated as I haven’t seen anything pertaining to this particular mouse.

TIA

⟐ Commented 7월 28, 2026 at 8:50 GMT-7

Logitech G502 Hero: My logo lightning is broken

Sun, 26 Jul 2026 22:41:37 -0700

My led on my logo is busted, how can i repair it because it wont work and it all adds up to a busted bulb, so how can i replace the led, are there any leds i can buy that can replace it, and what are they?

⟐ Commented 7월 26, 2026 at 22:41 GMT-7

Logitech G602: "Third Click" under mouse wheel not working.

Sat, 25 Jul 2026 04:12:16 -0700

Center "third" click under the scroll wheel has stopped working, I don't see a repair guide here which addresses this. Please advise?

⟐ Answered 7월 25, 2026 at 4:12 GMT-7

Logitech MX Anywhere 2S: Left wheel tilt is not working, how do I fix this?

Tue, 21 Jul 2026 05:23:54 -0700

The left wheel tilt is not working on the mouse. I have tried to reset mapping on the logioptions app and opened up the mouse already to check the mechanism. It does not seem like anything is blocking it (but I am not very technical). Any help would be much appreciated.

Dell Mouse: My mouse scroll wheel is not working.

Mon, 20 Jul 2026 04:41:07 -0700

My mouse scroll wheel is not working

⟐ Answer accepted 7월 20, 2026 at 4:41 GMT-7

Logitech PEBBLE i345: Mouse is not working

Sat, 18 Jul 2026 09:51:24 -0700

My mouse not working after it run out of battery I put batteries in it but it is not working

⟐ Commented 7월 18, 2026 at 9:51 GMT-7

Logitech Pro X2 Superstrike: Logitech Pro X2 Superstrike "Sticky" mouse click

Mon, 13 Jul 2026 16:19:13 -0700

my right mouse button has felt "sticky" no matter what settings its on since ive gotten it. does anyone have any fixes or at least have any guide to checking its bits inside to fix it myself?

Dell Mouse: Dell MO56UO cable problem

Sun, 12 Jul 2026 09:51:22 -0700

Why is the STP cable inside not working and the sensor not turning on?

⟐ Answer accepted 7월 12, 2026 at 9:51 GMT-7

Logitech MX Master 3S: MX Master 3S Won't Power On with New 3.7V Battery - No LEDs or Charging Light

Mon, 06 Jul 2026 11:29:40 -0700

My Logitech MX Master 3S randomly shut down and won't turn back on. I found the original battery was depleted to 0.5V. I replaced it with a new battery which is outputting 3.7V, but the mouse still shows no signs of life—no LEDs turn on even when plugged into a USB-C charger. I have verified that the interconnect ribbon cable and battery connector are seated correctly.

I have a multimeter and would like help identifying potential blown SMD fuses, bad voltage rail test points, or common failure points on the motherboard that would cause a total power failure despite having a good battery voltage.

I've attached high-resolution photos of the motherboard (front and back) and the USB-C daughterboard. Any guidance on where to probe would be greatly appreciated!

⟐ Commented 7월 06, 2026 at 11:29 GMT-7

Logitech MX Master 3S: How can I tell when it is fully charged

Sun, 05 Jul 2026 06:13:50 -0700

How can I tell when it is fully charged

⟐ Answered 7월 05, 2026 at 6:13 GMT-7

Logitech Pro X2 Superstrike: physical clicking issue its really bad

Sat, 04 Jul 2026 22:09:41 -0700

so basically i was watching youtube until the battery died so i went to charge it up until the triggers on both clicks are not going down physically i think i might have to do somethin about the spring or something idk but i need to know how to fix this

⟐ Commented 7월 04, 2026 at 22:09 GMT-7

Logitech MX Anywhere 3: Click is not working

Tue, 30 Jun 2026 02:14:40 -0700

Hello everyone!

Well, I have MX Anywhere 3 and I have now this issue: left side is not clicking. You need a stronger click/click in a precise spot of this side of the mouse to make the click work. I have this product for more than 5 years now. I saw there are some videos about how to fix it at home... and I am a bit afraid buying the tools/paying someone to fix it and then having the issue again...
Do you guys have any tips or instructions that I could follow to solve this problem? Have you faced this problem as well? Is really worth fixing it?

Thank you very much.

⟐ Commented 6월 30, 2026 at 2:14 GMT-7

HP 280 Silent Wireless Mouse: Mouse not working what do I do

Sun, 28 Jun 2026 17:16:04 -0700

Mouse not working. How do I fix it

⟐ Commented 6월 28, 2026 at 17:16 GMT-7

Logitech G600 MMO Gaming MSE: Older product different description

Sat, 27 Jun 2026 16:39:05 -0700

I am working on my wife's gaming mouse. It is marked as a G600 and I found a page for it. But the P/N and description are slightly different.

1) This version has a braided cloth cover.

2) P/N and S/N are on a tag attached to the cord vice underside of mouse.

3) P/N: 810-002849.

The mouse is not responding to some buttons, and I would like to find a way open it up to test them. I could splice in a new cable, but that is a radical solution which may not fix the issue.

HP Z3700 Dual Mouse: My mouse got damaged after constant falling

Wed, 24 Jun 2026 22:59:10 -0700

my mouse kept on falling now it only lights on but no response

⟐ Answered 6월 24, 2026 at 22:59 GMT-7

Logitech MX Master Series Mouse: Copper contact pads ripped

Wed, 24 Jun 2026 02:35:48 -0700

Hi All. My very first post here. Hope to get some advice from the community here.

I received an MX Master 3S that could not power up. I disassembled it and realized that the 10UH 100 power inductor is gone, and the contact pad highlighted in red was ripped off. I will try to take a close-up photo of it when I get home in a few days.

I have attempted soldering contact pads on bigger boards, but trying it on a mouse would be a first for me. I wonder if anyone here has experience in repairing such problems. Any advice would be appreciated.

⟐ Edited by author 6월 24, 2026 at 2:35 GMT-7

Logitech G502 Hero: Can't click and drag with my mouse

Mon, 22 Jun 2026 06:58:45 -0700

My G502 Hero mouse either doesn’t register single clicks or it double clicks and almost never lets me drag items on the screen. I’m guessing it’s a hardware button problem, but I’m no sure. Can it be fixed?

⟐ Commented 6월 22, 2026 at 6:58 GMT-7