⟐ Commented 10월 05, 2020 at 14:46 GMT-7

⟐ Commented 1월 17, 2022 at 10:06 GMT-7

Now, the screws are out and the cable is disconnected.

The puffy side of the battery is stuck/glued onto something.

How do I retrieve the battery? Its thicker than my laptop I NEED to remove it. How do I figure this out?

Thanks for any help!

(Images may swap because of the website interface)

Third video

https://youtu.be/_Asb2daL-zM

⟐ Answered 10월 27, 2023 at 7:31 GMT-7

As the title says, I broke one pin of the power socket on my blade. I only managed to find replacement parts for jack sockets.

Does anyone know the reference or has attempted such a repair ?

Thank you in advance

The laptop model number is razor blade 15 rz09-02385e71. Not sure what the motherboard # is, I can open up to take look.

⟐ Commented 8월 10, 2024 at 15:00 GMT-7

https://www.amazon.com/EM-EMAJOR-TECH-LL...

⟐ Answer accepted 10월 10, 2022 at 16:27 GMT-7

My 2018 razer blade 15 (GTX 1070, 16gb RAM, Intel core i7-8750H, etc., ID: rz09-02386F91) could use some repairs.

Context:

The ribbon cable connecting the LCD to the motheboard is damaged at the hinge point (I believe this is a common issue), after a few weeks of the screen sometimes glitching a bit with temporary flickering, it is now only on (and responsive) when I partially lift the laptop screen (i.e., if I hinge the screen out past a certain angle it turns off).

Additionally, the microphone and webcam don't work (that's been the case for over 2 years), their own ribbon cable runs through with the LCD one.

Laptop is past warranty obviously, I haven't contacted razer support, but doubtful that they would help much.

Questions:

Can I replace the ribbon cable only (connecting LCD, microphone and webcam)?

If so do you know where I can find the part?

Or if I have to replace the LCD entirely, where can I find that/does it automatically come with a new ribbon cable?

Cable part number seen here:

Not sure what this is, might be proof of a previous repair:

Thanks for your help

⟐ Commented 5월 02, 2023 at 10:19 GMT-7

This is the second blade I’ve owned that has had a battery swollen up, one was almost two years old and this is one is not even a year old. This one though the RTX 2070 15” model has a burn mark on this ribbon. What is it for? I’m assuming its related to the battery controller?

⟐ Commented 3월 29, 2021 at 21:00 GMT-7

Doing my due diligence I opened up the back and lo and behold the battery was swollen to $@$*. I removed the battery, and attempted to run on AC only, however the random power offs still remain. Please advise, and thank you.

⟐ Answer edited 10월 23, 2024 at 6:26 GMT-7

On the back it has the model number: RZ09-02385.

I'm looking at purchasing the one from the store: Razer Blade 15" (2018/2019) Laptop Battery

The page does not say model numbers for the 2018 model. Is there a way I can tell it will be compatible?

⟐ Answer accepted 5월 24, 2024 at 12:06 GMT-7

⟐ Commented 7월 15, 2023 at 10:26 GMT-7

I've opened up my laptop for a repair and noticed the fans are horrendous and covered in dust. Before going in there with my Dyson vacuum cleaner, what tool do you recommend for sucking the dirt away and minimise spreading anywhere else during cleaning?

Cheers!

⟐ Answer accepted 10월 24, 2022 at 2:11 GMT-7

⟐ Answered 10월 09, 2025 at 12:06 GMT-7

Anyone got an idea of what sort of material i can/should use for this?

⟐ Answer accepted 11월 24, 2022 at 16:52 GMT-7

⟐ Answer edited 8월 31, 2022 at 7:27 GMT-7

⟐ Answer accepted 12월 18, 2021 at 19:09 GMT-7

Someone please, show me how to actually remove the battery.

The screws come out yes, but the battery does not.

Am O suppose to just rip this thing out and hope there's not some other connector or anchor I'm going to break (like the heat sink)

⟐ Commented 10월 28, 2021 at 19:38 GMT-7

sometimes area gets bigger like this and sometimes they disappear. (this is a picture while I was running jscreenfix)

Also screen has some electrical sparkle noise on the bottom.

I may be wrong, but intuition tells me that there is no physical damage, because it didn’t experience drop and I was more gentle with closing/opening than while removing tape during disassembling(I even have bent it a little and it didn’t added any new damage). So, before I buy replacement, what problems there may be besides of physical damage and how can I fix them?

Also I would appreciate to know if it’s possible to replace with QHD 165 HZ panel (currently I have FHD 144HZ)?

⟐ Answered 9월 30, 2021 at 11:03 GMT-7

⟐ Answered 6월 29, 2021 at 20:32 GMT-7

⟐ Answered 1월 23, 2021 at 12:19 GMT-7