⟐ Answered 8월 21, 2023 at 3:47 GMT-7

After I attach the black grounding wire to the ESD mat, I would take the black grounding wires clip off and plug it into the ground plug adapter and plug that into an outlet. Now with the blue wire connected to the wrist strap, I would take off that clip and plug it into one of the black grounding wires sockets, right? Also, does it matter which one of the black grounding wires socket I use to plug the blue wire into?

I attached a photo to see what I am talking about

⟐ Answered 7월 06, 2026 at 7:05 GMT-7

⟐ Edited 6월 28, 2026 at 7:23 GMT-7

⟐ Answered 6월 28, 2026 at 7:01 GMT-7

⟐ Commented 6월 25, 2026 at 22:29 GMT-7

⟐ Answered 6월 24, 2026 at 4:25 GMT-7

The needle can not pick up bottom thread when sewing a fabric. The rotary hook’s timing is adjusted and can grab the bottom thread. However when I tried to sew fabric, the needle won’t pick up bottom thread. Please see the attached pictures.

Another problem sometimes the upper thread was broken like it was cut by a knife.

Need help

Any help and advice are appreciated.

⟐ Answered 6월 23, 2026 at 22:06 GMT-7

⟐ Answered 6월 19, 2026 at 10:12 GMT-7

⟐ Answer edited 6월 11, 2026 at 19:49 GMT-7

I am not sure if anyone can help with this, but thought I'd check here anyway. I have been trying to find a cause for this issue for months and have found no solutions whatsoever.

This has happened in both Chrome and Edge, so I know it must be a Windows issue. So, when I am in my browser, and I am doing work, being productive, without any clear cause, the browser page will revert back to the previous page. In some of the work I do, this results in lost work and having to start over which is highly annoying and results in a lot of wasted time and aggravation.

It does not have anything to do with my mouse or keyboard, as both of those have been replaced and it has not solved the issue. There are no keyboard hotkeys assigned to move the browser page forward or back. I don't use the touchpad but no gesture settings are assigned to perform this function. I am at my wit's end and am seriously considering switching my whole set up to my Mac mini, which would be a hassle but I am so tired of this happening with no fix or useable advice.

I have searched the internet many times for a solution, and this seems to have been an ongoing issue with Windows on different PCs for a long time from what I can see, so I am hesitant to say that it is only an issue with my specific computer.

Has this happened to anyone else, and did you ever find a solution? The most advised solution from any kind of support has been to do a clean Windows install which seems like a huge deal with no guarantee of a fix.

⟐ Commented 5월 21, 2026 at 8:50 GMT-7

⟐ Answered 5월 15, 2026 at 23:32 GMT-7

It's hard even to get my "question" here, already when typing my "device" and "title" - iFixit "Ask a Question" already puts in suggestions to solve my question as I type...

Just gotten your lovely "Thank you" mail from iFixit, I wanna give something back!

It started some years ago, my old Travelmate 6592G started to get - well -old, and at the about that time my best friend of mine got cancer, got operated, got well, and suddenly - he was in need of a PC who could handle all the internet, customers and what not in his shop - the world turns, and so does everything else... "Borrow my old laptop old friend, it'll do the work for you mate".

Well, it did, and he still does, however, "Listen old friend, your battery is kinda worn, so I¨ll get you a new one before you get your laptop back, and its overheating kinda fast...".

The battery we quickly fixed with help from the internet, and he got me a new one, however - the overheating persisted, and this is where iFixit comes to the rescue!

The two of us both being technicians, we found iFixit, found the instructions on how to take apart my old Travelmate, clean it for dust all the right places, apply new heat transferring paste, put it all together again, and start it up again monitoring the temperatures with the small programme I installed, we all had a happy Saturday afternoon, my friend, me and my son.

After that of course came my daughters broken iPhone (my sons twin), my good colleagues iPhone, and - well - whats next...

All in all, couldn't be what I am without you lovely iFixit¨s!

Thank you, and hope to give you all back soon....and a happy christmas.

Jens.

⟐ Commented 5월 13, 2026 at 21:55 GMT-7

⟐ Commented 5월 12, 2026 at 1:37 GMT-7

I don't know if this is a hardware or software problem. I updated my FireFox to 3.6.4 last night and it recommended installing the new Adobe ( I think Flash). Safari windows will not open, Software Update fails to function or even open. I had heard something about Adobe and Apple having a tussel. This is unacceptable. Has Adobe put the screws to me? Anyone else run into this problem?

It was install_flash_player_osx_ub(2).dmg Just downloaded Safari 5.0 and will try installing again. Re-install failed.

It probably is Adobe http://blogs.computerworld.com/adobe_fla... The question now is how to fix it. I download and ran Flash uninstaller and the problem persists.

UPDATE - I used the amnesia to remove flash, firefox and safari. I then reinstalled the Safari. It opens but no window and can't log into Apples software update. I would use migration assistant to restore the older versions but they're on an intel MBP and I don't know if that would work. Any suggestions would be welcomed at this point. I used migration assistant to move the Library from an old system on a second HD and it restored my ability to use Safari again. Software update still does nothing.

⟐ Commented 5월 11, 2026 at 21:47 GMT-7

⟐ Commented 4월 30, 2026 at 17:38 GMT-7

⟐ Commented 4월 28, 2026 at 5:04 GMT-7

⟐ Commented 4월 02, 2026 at 0:26 GMT-7

⟐ Edited 4월 01, 2026 at 0:18 GMT-7

List of things I have already tried (in no particular order):

• Restarting Chrome
• Restarting computer
• Resetting Chrome settings
• Clearing cache and cookies
• Re-installing Chrome
• Going incognito
• Disabling/removing extentions
• Using the software removal tool
• Troubleshooting
• Using guest profile

The only thing that has been suggested to me that I have not yet tried is using Chrome Beta and Chrome Canary. I will eventually try them if nothing better can be suggested to me. I would prefer them to be a last resort though, as I do not want to risk any bugs.

As for which version of Windows and Chrome I have, it's Windows 10 and Chrome 60.0.3112.101

⟐ Commented 3월 24, 2026 at 4:50 GMT-7