iFixit - Answers With Device "Tool"

Troy-Bilt Lawn Mower: anti scalp wheels 2014 model

Wed, 20 May 2026 15:20:29 -0700

2014 pony continues to scalp. how do i install anti scalp wheels?

Riding Mower: Blade diagram for a LE1433H Snapper mower blade and drive belt

Mon, 18 May 2026 16:38:01 -0700

How to route the drive and blade belt for a LE1433H snapper mower

i need the blade belt too. its a 33" deck

the model # LT145H33HBV Ser#21357219

I need the blade diagram too, please @oldturkey03

⟐ Commented 5월 18, 2026 at 16:38 GMT-7

Generator: replacement automatic voltage regulator

Sun, 17 May 2026 12:09:07 -0700

I'm resurrecting an old Powermate 5000 Model PC0545305.01 with an obsolete & malfunctioning AVR (ICM AB3101-240). ICM weren't any help. This units AVR specs apparently has 240 VAC sensing and 25 VDC output to the brushes. I connected two 12 VDC batteries to the brushes to confirm proper output VAC. Can anyone identify a source for an AVR with the necessary specs?

⟐ Commented 5월 17, 2026 at 12:09 GMT-7

Bosch Electric Drill 1006VSR 2009: Want to learn repairs of this drills

Sun, 17 May 2026 10:50:45 -0700

Need someone to teach me how to repair this electrical drills

⟐ Commented 5월 17, 2026 at 10:50 GMT-7

Generac Generator 011400 1999: Magneto coil part number

Sat, 16 May 2026 13:57:28 -0700

Whats the part number for the magneto coil on the generac generator model 01140-0

Dremel 4000: Has anyone got a 2A switch for one of these (not the whole control)

Sat, 16 May 2026 13:30:25 -0700

Hi, has anyone got the 2A switch for this that I could buy. Not the whole control just the little black switch. Kind regards.

Craftsman Pressure Washer 58075205 2007: Oil plug where is it

Sat, 16 May 2026 01:15:23 -0700

Where is the oil drain plug located at?

⟐ Answer edited 5월 16, 2026 at 1:15 GMT-7

Milwaukee Circular Saw 273020 F31A 2013: Saw is not responding at all

Fri, 15 May 2026 21:02:33 -0700

It was working fine till yesterday. I was using it yesterday to cut the 3mm thick cement sheets. I cut several sheets and i stopped to measure and then when i tried cutting another , it stopped responding. At first i thought might be battery is dead but battery was almost full still i changed the battery to another one. But nothing changed since then. It is not working. Not even the light is on when i am pressing the button

Ridgid Miter Saw MS255SR 2012: Looking for the dust collector coming off of the blade.

Fri, 15 May 2026 13:20:29 -0700

It is the device having 3 screws which holds it in place. Left side has a fixed piece about 3" long, and on the right side has an additional piece the same length where the screws attach to it. The bottom has a flexible rubber piece acting as a scoop. Ridgid has no information any longer and cannot give me a model # for it.

any idea as to where I may be able to purchase it?

⟐ Answer edited 5월 15, 2026 at 13:20 GMT-7

Craftsman Tiller 31629264 2017: And place the pool rope on my Craftsman tiller.

Fri, 15 May 2026 06:35:19 -0700

Had to replace the pool rope on a 316 point 292640

Craftsman Trimmer 17274545 2017: Manual for 2013 craftsmen weed whacker speed start 8n1 attachment syst

Thu, 14 May 2026 15:38:22 -0700

How to use the speed starter w/8n1 system

Dewalt Nailers DWFP12233 2016: Loose contact arm spring. How to replace and prevent reoccurrence?

Thu, 14 May 2026 03:03:57 -0700

On my DWFP12233 nailer the contact arm spring is dislodged and comes out from under contact arm cover. How do I replace it and prevent reoccurrence?

Powermate Generator: Power mate generator pm54-2000 I need a diagram of the motor so I can

Thu, 14 May 2026 02:51:28 -0700

Diagram for power mate generator serial #57420727 model#2022 so I can put it back together

GaoJie Soldering: Gaojie 100 watt soldering iron heater units

Wed, 13 May 2026 13:43:03 -0700

I'va had 2 Gaojie 100 watt soldering iron heater units fail fail in one year. Can I buy replacement 100 watt heater units?

⟐ Answer edited 5월 13, 2026 at 13:43 GMT-7

Echo Trimmer SRM230 2017: Where can I buy genuine parts for the echo srm225 n sr trimer and the

Wed, 13 May 2026 11:56:04 -0700

Where can I buy parts for the echo srm 225 n srm 230 trimer parts kits

Milwaukee Multitool 262620 2014: Does the speed nob have any type of metal under the nob itself or is i

Sat, 09 May 2026 22:45:42 -0700

Does the speed nob have any type of metal under the nob itself or is it all plastic?

FixHub Smart Soldering Iron: Suddenly stopped turning on

Sat, 09 May 2026 04:30:34 -0700

I have been using the soldering iron today, set it down for 1h, came back... and now it won't light up when plugged in. The web interface does not find it. I don't get an USB device plugged in sound (should it even do that?).

Any ideas on how to narrow down the error?

It is about 2 years old. I used it maybe 20 times since then.
I tried multiple power supplies but nothing seems to help.

Does anyone have any more trouble shooting tipps?

⟐ Commented 5월 09, 2026 at 4:30 GMT-7

FixHub Portable Power Station: My Station is not charging anywhere near 2.25A at 20V

Fri, 08 May 2026 15:26:54 -0700

My Power Bank is not charging near it's 45W max through the rear port at 20V with any of my 65W power adapters.

This is not due to my chargers or cables as I have tried a variety of adapter cable combinations that all work with my other 65W+ USB C devices (laptops, etc.)

All of these chargers only delivered 10W when they support higher wattages on other devices:

Dell 65W (supports 20V 3.25A) --> only 10W

Chromebook 60W (supports 20V 3A) --> only 10W

ASUS ROG ALLY 65W (supports 20V 3.25A) --> only 10W

RavPower 61W PD charger with 100W cable (supports 20V 3A) --> only 10W

Interestingly:

30W Anker PowerPort Atom III Slim with 100W USB C cable was able to deliver 27W at 20V.

Insignia Nintendo Switch power adapter which only goes up to 15V was able to deliver 32W at 15V.

UGREEN Nexode mini 30W delivered 27W at 20V.

This is a strange pattern. The lower wattage adapters are able to charge at their max,

but my higher wattage chargers are being limited to about 10W.

I tested these while the battery was at about 25%

I have already updated to firmware 1.5.0

Air Compressor: Open Amp Sensor error in GD compressor

Wed, 06 May 2026 21:33:15 -0700

Hi

I am working on Gardner Denver Compressor model Electra Saver.
I recently came across an error message Shutdown 'Open Amp Sensor'

This error message popped up within few minutes upon turning on. There is a light on the Compressor motor as seen in above pic, don't know what it means. The motor doesn't get hot.

After pressing Reset & then Constant run, the compressor runs, in most of the cases - all day. But sometimes it stops after running for few hours with above error message.

I tried to look thru the manual but couldn't find above Error message.
Any thoughts what this error is for & how to fix it?

Thanks

⟐ Commented 5월 06, 2026 at 21:33 GMT-7

Bosch Rotary Hammer 11227E 2015: Drill sat for 5 years now only drill works no hammer

Wed, 06 May 2026 19:24:04 -0700

I have had tis drill sitting in my shed for 5 years without any use. It worked fine when I last used it. Now it works in the front drill setting but not in the other 2 settings.

⟐ Commented 5월 06, 2026 at 19:24 GMT-7