iFixit - Answers With Device "USB Flash Drive"

SanDisk Cruzer Blade: Write protected pendrive issue

Thu, 20 Jun 2024 09:27:31 -0700

my pen drive has been write protected, format related issue.

I did everything like in registry edit, cmd command, used tools, but the problem remains same

⟐ Commented 6월 20, 2024 at 9:27 GMT-7

USB Flash Drive: How do I fix a DEAD flash Drive?

Thu, 19 Mar 2026 04:40:11 -0700

I have a Crucial 32 Folding flash drive. Worked fine on Tuesday night, plugged it in on Wednesday morning and... Nothing. Absolutely nothing! Problem is, it contains ALL my files (of course) which I need (of course). Is there a way to fix it myself (I have a "little bit" of electronics skills) , or should I send it off and jus pay the $$$$ to have it fixed and data recovered? Any ideas, suggestions? HELP?

⟐ Answered 3월 19, 2026 at 4:40 GMT-7

Sandisk Cruzer 4GB: How to reset write protection?

Sat, 13 Apr 2019 08:06:44 -0700

My flash is suddenly write protected

How can I recover it?

⟐ Comment deleted 4월 13, 2019 at 8:06 GMT-7

USB Flash Drive: Why is my USB device not recognized?

Wed, 12 Oct 2022 19:09:16 -0700

The system of my computer is Windows 10. When I plugged in my USB hard drive it just doesn’t turn out and shows that "USB device not recognized". I have upgraded all the drivers. They are up to date but still not working. What can I do with it?

⟐ Commented 10월 12, 2022 at 19:09 GMT-7

USB flash Drive: Any way to unlock cheap thumb drives from tradeshows?

Fri, 18 Oct 2013 11:09:22 -0700

I picked up a handful of thumb drives from a client that went to a trade show. I'm sure they are hardware locked even when gparted won't delete the partition or format the drive. Anyone found a way to unlock these?

They would be nice to recycle for linux installs.

⟐ Edited 10월 18, 2013 at 11:09 GMT-7

Sandisk Cruzer 4GB: I can't erase file

Mon, 27 Aug 2012 08:35:48 -0700

Hi, I purchased this unit at Office Depot and would like to use it fully as a Mac unit. However it came with a 6MB Windows file called U3 System. Normally I wouldn't care about the 6MB but every time I use the stick I have to separately eject this file. Its a nuisance I would like to be rid of but get info says I can only read the file. Anyone know how I can delete it? Ralph

I have tried to delete this thing every way I know. In get info its listed as a read only file. Ralph

⟐ Answered 8월 27, 2012 at 8:35 GMT-7

SanDisk Cruzer Blade: Can the data on this cracked SanDisk flash drive be recovered?

Mon, 14 Aug 2023 09:49:32 -0700

I have this SanDisk flash drive that has been cracked. I am wondering if there is any way to retrieve my data. I have found a couple videos that show recovery experts attempting to solder it where the wires may be broken or switch the nand and the connector chip. Has anyone ever had this performed on their SanDisk and if so, how likely is it to actually work?

⟐ Answer edited 8월 14, 2023 at 9:49 GMT-7

Sandisk Cruzer 4GB: Why is my pendrive corrupt

Sun, 15 Mar 2026 19:49:54 -0700

My pendrive is corrupt

⟐ Commented 3월 15, 2026 at 19:49 GMT-7

USB Flash Drive: I can't access into USB Pendrive..

Thu, 27 Oct 2022 06:27:31 -0700

Hi i need your help right now very urgent. my USB Pendrive not recognized or detected on THIS PC in my laptop/PC. I can't access into USB Pendrive..

Already try in Disk Management also not appear the Drive Letter for USB Pendrive. Inside my Pendrive a lot of important data/files.

How i can solve this problem..plsss help me..or you can email me Thanks You

⟐ Answer edited 10월 27, 2022 at 6:27 GMT-7

USB Flash Drive: USB Not detecting to pc

Sun, 11 Feb 2024 00:32:48 -0700

When I connect my USB flash drive to my PC, it doesn't show any data. "Please insert a disk into a USB drive (D:)" is the message that appears.

⟐ Answered 2월 11, 2024 at 0:32 GMT-7

SanDisk Cruzer Blade: Broken stem on pcb SanDisk Cruzer Blade

Tue, 05 Mar 2024 09:54:18 -0700

Hello

Recently my parent’s flash drive had been physically broken and cannot receive power. I took off the plastic case and saw that the PCB of the flash drive and the stem were together. The physical damage of the drive has a line going across where the PCB and the stem head meet and does go across a few traces on the PCB. This is my first time dealing with something like this and I’m wondering what I can do. Any help would be really appreciated. Thank you!

⟐ Answered 3월 05, 2024 at 9:54 GMT-7

SanDisk Cruzer Blade: chromebook recovery utility not unzipinng file

Wed, 06 Aug 2025 09:03:41 -0700

I dont know why but in the chromebook recovery utility extention it wont unzip the file. please help!

⟐ Answered 8월 06, 2025 at 9:03 GMT-7

USB Flash Drive: Why cant I remove write protection how to reinstall firmware

Thu, 12 Oct 2023 07:43:20 -0700

I have a sandisk usb drive but I can’t remove write protection I tried diskpart and registry and neither worked. can I fix it? UPDATE: I think i need to reinstall the firmware how would i do that and how to back up my existing firmware

⟐ Commented 10월 12, 2023 at 7:43 GMT-7

USB Flash Drive: My SanDisk Ultra only works when I aggressively push down the USB

Thu, 09 Nov 2023 13:28:14 -0700

My USB 3.0 64GB SanDisk Ultra is only recognised when it's tilted at a high angle downwards, I have alot of important things on my USB that I would like to get back. I have tried on different computers, different ports, and the same thing. Even if it does work when its tilted downwards, it just "unplugs" itself after a few seconds. Help please?

⟐ Commented 11월 09, 2023 at 13:28 GMT-7

SanDisk Cruzer Blade: The drive is no reading on files of the cpu

Mon, 15 Dec 2025 13:28:16 -0700

The disk is not appearing on the cpu

⟐ Answer edited 12월 15, 2025 at 13:28 GMT-7

SanDisk Cruzer Blade: Why is data stored in my USB not reflecting?

Sun, 19 May 2024 09:30:04 -0700

I got a USB 2.0 32 GB, when connecting it to my devices nothing displays and states that the total capacity of the USB is 0.05 GB and there's nothing stored in it

⟐ Commented 5월 19, 2024 at 9:30 GMT-7

Sandisk Cruzer 4GB: How to create bootable usb using rufus/software

Tue, 03 Jan 2023 07:20:30 -0700

I'm confused ...and i want to know...hope you help me

⟐ Answered 1월 03, 2023 at 7:20 GMT-7

USB Flash Drive: Recover lost data fromBroken Usb

Tue, 03 Jul 2018 04:47:01 -0700

I had the Usb plugged in to my laptop well I was at my desk while I was going to take it to another room because my brother asked for help I dropped my laptop and the Usb hit the side of the table, and broke. How do I fix it or how do I recover the 7 years of data stored in it?

⟐ Answer accepted 7월 03, 2018 at 4:47 GMT-7

USB Flash Drive: My flash getting hot,when ı plug into my laptop.

Tue, 25 Oct 2022 16:26:30 -0700

I have SanDisk ixpand 32 GB (2 years old) and a brand new SanDisk Ultra Fit 3.0 32 GB USB thumb flash drives.

My problem is, both flash drives are always getting hot when I plug them in and do any file transfer.

What can I do to prevent them from overheating ?
Is this harmful to them ?

Thanks,

Regards.

⟐ Answered 10월 25, 2022 at 16:26 GMT-7

USB Flash Drive: Try to swipe nand chip on working PCB

Mon, 08 Nov 2021 00:51:30 -0700

Hi Guys,

I have an issue, I have a very important usb key on which I want to recover data,

I know to do that I have 2 option : -Use a nand adapter to computer (SD often)

Or to swipe the nand chip on another usb pcb

The issue I have is I can't manage after deep search to exactly identify the socket of this chip, the manufactor don't want to provide me this information

It is a SK Hynix chip, I supose E2NAND 64Gb (the ref of the usb key is GOODRAM twister 3.0 64Gb)

The socket looks like the LGA60 (of many iphone chip), but there some difference on some points,

Is it the right information ?

So is the adapter will manage to read the chip ?

If I want to swipe the cheap on another usb pcb, I need to reball it, but I didn't manage to find another stencil than LGA60, with some difference,

So Should I only fill the right whole ? or if there no contact, with the flux and the paste, put paste in all the whole of the stencil is not a problem ?

Here some picture :

Thanks in advance for the time and help you will give me

I am sorry to be a newbie and speak bad english, all my apologies for that

Regards

Nico

⟐ Answered 11월 08, 2021 at 0:51 GMT-7