<![CDATA[iFixit - Answers With Device "WED8740DW1"]]> https://ko.ifixit.com/Answers/Device/WED8740DW1?rss=yes en-US Thu, 09 Jul 2026 07:20:03 -0700 <![CDATA[WED8740DW1: I am experiencing a No Heat Condition -- This is what I have done...]]> I have performed a lot of the basic troubleshooting steps and I am still stumped.

Here is what I have done, so far:

  • I have vacuumed out the interior of the dryer, as well as the blower, blower housing, exterior vent exiting the dryer, the flexible duct, the rigid duct leaving the house. All collected from this lint was no more than golf ball-sized.
  • I have continuity on the thermal fuse.
  • I have continuity on the thermostat on the heating element housing.
  • I have continuity on the heating element itself.
  • I have replaced the thermistor as a precaution.
  • I have replaced the control board as a precaution.
  • I have tested the incoming power at the outlet, I have 120v from center to both legs and have 240 between both legs.
  • I have set a timed-dry cycle and dryer operated and completed the cycle successfully, with no error messages. And no heat.

I am open to any and all valid ideas to get this dryer to work correctly.

Thanks in advance!

⟐ Answer edited 7월 03, 2026 at 2:10 GMT-7

]]> https://ko.ifixit.com/Answers/View/962172/I+am+experiencing+a+No+Heat+Condition+--+This+is+what+I+have+done... https://ko.ifixit.com/Answers/View/962172 Fri, 03 Jul 2026 02:10:35 -0700