⟐ Answer accepted 5월 24, 2017 at 4:49 GMT-7

I have tested another LCD and it works perfectly. That is, the problem is with the LCD unit. Someone had such a problem? Can you fix it?

Restore and Hard Reset don't fixed my problem.

⟐ Answer accepted 5월 23, 2017 at 4:46 GMT-7

Please advise what I need to for screen replacement.

⟐ Answer accepted 5월 19, 2017 at 9:24 GMT-7

⟐ Answer accepted 5월 19, 2017 at 7:45 GMT-7

i read up about the problem and found that i may have blown a fuse on my board for the backlight. so i just left the iPad on a shelf and didn't use it for several months. i picked it up today and plugged it in to see if anything happened and the battery charging icon came on the screen. now the screen works and sound works.

except, my digitizer is not stuck to the ipad but is connected and when i touch certain parts of the screen, other parts interract or nothing happens at all. also, the home and power button now seem not to work but the power button only works when it is held down to power off the device.

has anybody had this problem before or know how to solve this. someone wreckons that they could repair it for £45 but it seems too good to be true.

thanks

⟐ Answer accepted 5월 17, 2017 at 5:15 GMT-7

⟐ Answer accepted 5월 02, 2017 at 4:48 GMT-7

Everything powers on, home button works great but when I slide to unlock the iPad it is very difficult almost like I have to go 1 inch to the right of the prompt.

Then when I go to enter the pass code it will start hitting random numbers. Sometimes 2 to 4 at a time and untimely locks me out of the iPad.

Anyone seen this or have a solution?

⟐ Answer accepted 5월 02, 2017 at 4:47 GMT-7

⟐ Answer accepted 4월 26, 2017 at 16:01 GMT-7

I have a IPad i didn't remember the password. So please help in hardformating my ipad.

⟐ Answer accepted 4월 24, 2017 at 4:31 GMT-7

thanks

⟐ Commented 4월 17, 2017 at 10:36 GMT-7

⟐ Answered 4월 17, 2017 at 4:52 GMT-7

Sorry about that, tried to post from a mobile and was unable to add a photo here is the photo, thanks for the help.

⟐ Commented 4월 12, 2017 at 11:57 GMT-7

For about a year or so, my iPad mini 2 LTE has these about 1 pixel tall black lines that span along the bottom of the screen. They have one pixel span in between each one and the collective height is about 1cm from the bottom of the screen, I'll to attatch a photo because I doubt anyone knows what I'm saying.

It obviously is something to do with the LCD but, I was wondering if I needed a screen replacement or maybe the connection is off a bit, I don't really know.

PHOTOS OF ISSUE

⟐ Answered 4월 08, 2017 at 21:36 GMT-7

My ipad was working fine until earlier, it froze and I did the hard reset. After doing it, it turned on but to my surprise, the screen was on set-up mode and was asking for the iCloud pasword. I tried to input it a few times but it still didn't work. Then I tried hard resetting it again but now all I get from it is the apple logo and then it turns itself off again.

I also tried connecting it to the iTunes on my laptop.

Do you have any suggestions for this?

Thanks,

Ian

⟐ Answered 4월 06, 2017 at 1:58 GMT-7

⟐ Commented 4월 04, 2017 at 12:36 GMT-7

i tried to Change my Touchscreen but I broke obviously the fl7500 and the c7523 while I unplugged the power connector.

Is this right?

Is there any European shop I would rather prefer a German shop who sell those Things?

Thank you. :)

⟐ Answer accepted 4월 03, 2017 at 20:42 GMT-7

I tried my first screen replacement on my iPad mini 2.

There was scratches only on the glass not on the Lcd.

So I bought one new glass. I followed a tutorial on youtube everything was fine until I tested it.

I can hear the noise but the the screen is still black.

I tried to do a hard reset but doesn't work and tried to connect my device on iTunes to recover my iPad but unfortunately I've got a password and can't do it.

Can you Help me please?

Ps : sorry for my english is not really fluent.

Regards

Thank You.

Yeah I think that's the mistake I did because in the tutorial they didn't explain to me to do it so i didn't disconnect the battery first :/

I will bring it to a repair shop. Do you know roughly how much it could be to be sure?

Thank you very much for the quick reply.

⟐ Edited by author 4월 02, 2017 at 5:44 GMT-7

I have a fried iPad mini 1, logic board issue, no power whatsoever, and am considering buying a mini 2 motherboard so I can salvage it and make it realitivly usable again.

[read as 'want to build Frank-en-iPad']

I am curious as to which parts from the original iPad mini would be able to function normally with a logic board from a mini 2, just from looking at the logic board I can see that the battery connectors are different as well as the power, volume and vibrate switch connector.

Will the antennas, display, speakers, cameras etc function normally with the Mini 2's logic board?

Any help greatly appreciated.

⟐ Answer accepted 3월 29, 2017 at 9:01 GMT-7

when I hold down sleep bottom and home button a slider appears pointing to itunes

⟐ Commented 3월 27, 2017 at 3:19 GMT-7

⟐ Answer accepted 3월 19, 2017 at 13:20 GMT-7