iFixit - Answers With Device "iPad Pro"

iPad Pro 12.9": Can someone tell me what those components are?

Mon, 15 Jan 2018 09:45:13 -0700

i've got a spare motherboard but is missing 3 components,

i've havent find any schematics yet so i'm clueless.

the missing smd are in the green rectangles.

From what i've seen so far on youtube, the 2 upper left could be 2 coils 1.0 ohm, but i'm not sure. No cules about the data filter on the lower right.

Can some1 help me?

the image link is: https://imgur.com/a/bOhbV

⟐ Answer edited 1월 15, 2018 at 9:45 GMT-7

iPad Pro 12.9": iPad Pro 12.9 battery replacement, not charging.

Fri, 12 Jan 2018 08:59:49 -0700

I replaced a battery in the iPad Pro 12.9 iOS 11 with two OEM batteries. The charging symbol appears and sticks at 1% or 30%. I put the old battery back in and it charges and functions perfectly.

Not sure what to do at this point. I googled the issue and couldn’t really get a tip.

Any advice?

⟐ Answered 1월 12, 2018 at 8:59 GMT-7

iPad Pro 9.7": iPad Pro 9.7" No Touch After Screen Repair

Tue, 19 Dec 2017 05:28:24 -0700

Hi There,

I've replaced the screen on an iPad Pro 9.7" and this was just a routine regular repair, however, when this had loaded up theres no touch!

All visually looks ok on the logic board and have tried multiple screens with no luck - does anyone have any suggestions?

⟐ Answer accepted 12월 19, 2017 at 5:28 GMT-7

iPad Pro 12.9": Half touch not working

Sun, 17 Dec 2017 00:11:13 -0700

Hi guys I had my screen replaced on my iPad pro 12.9 by a tech micro soldier and after screen fit top half of the screen isn't responding this is the second screen I've tried as I thought the first one might be broken turns out I have the same issue ,could this be related to the daughter board broadcom chips in anyway? Filters are good as I do have touch to some degree any help would be great

⟐ Answer deleted 12월 17, 2017 at 0:11 GMT-7

iPad Pro 9.7": Whats the difference's between iPad Pro 9.7" (2016 ) & (2017) models?

Wed, 06 Dec 2017 12:27:35 -0700

What are the differences between the 9.7" iPad Pro released in 2016 and the 9.7" iPad released in 2017?

Whats the difference if the iPad will be used mainly for photography processing (24.2 MegaPixel DSLR input) and possibly for recording music (GarageBand or other software)?

In addition to basic email, etc,

⟐ Answer deleted 12월 06, 2017 at 12:27 GMT-7

iPad Pro 9.7": Safari freezing since upgrading to iOS 11.x

Mon, 20 Nov 2017 19:28:02 -0700

Beginning with the iOS 11.x update Safari randomly freezes at various times.

If I need to back up while typing it sometimes freezes. Sometimes I start to type and when the keyboard comes up something is already pressed. It can be the back button, another random key, or sometimes it is an “accented” letter such as å or ē which I have never typed. Other times it will turn off while on a web page, turn back on and it is frozen, you cannot see any of the website tabs showing, it is just a solid gray.

The only thing that works is a force restart, that gets pretty irritating after 7-8 times a night...

HELP!!!!!

⟐ Answered 11월 20, 2017 at 19:28 GMT-7

iPad Pro 12.9": Vertical lines on lcd after display replacement

Fri, 06 Oct 2017 04:59:05 -0700

I recieved an iPad Pro 12.9" in for repair from another shop. They bought a new display with the daughter already attached, but it is showing a bunch of vertical lines down the right center and nothing else. It doesn't look like they disconnected the battery while replacing the display so im not sure if its just a faulty display or they damaged something on the board. Thanks in advanced!

⟐ Answer accepted 10월 06, 2017 at 4:59 GMT-7

iPad Pro 12.9": no touch function after Display replacement

Wed, 28 Jun 2017 07:41:08 -0700

I replace the Display and i have a picture but the touche function don't work.

I testet another Display but the same problem.

Is there anywere what i overlook ?

⟐ Answer edited 6월 28, 2017 at 7:41 GMT-7

iPad Pro 9.7": Dimensions of the battery for iPad Pro 9.7

Wed, 14 Jun 2017 05:43:21 -0700

Does anybody know the dimensions of the battery for iPad Pro 9.7?

Height, length, depth and weight?

⟐ Commented 6월 14, 2017 at 5:43 GMT-7

iPad Pro 12.9": SIM card reader not working

Wed, 12 Apr 2017 22:07:35 -0700

This site is awesome! Please help Apple told me they couldn't help at all. I am paying for cellular service on my iPad Pro I spent an arm and a leg for. I need the internet for work. The sim reader doesn't work at all it says no sim. My cell company switched the SIM card and no dice. Someone please help! Don't want to have to buy a new iPad.

⟐ Answered 4월 12, 2017 at 22:07 GMT-7

iPad Pro 9.7": Screen Replacement on a 9.7 iPad Pro

Sun, 29 Jan 2017 20:17:58 -0700

When replacing the screen does it require any soldering?

⟐ Commented 1월 29, 2017 at 20:17 GMT-7

iPad Pro 12.9": Connecting pad pro to 5k iMac

Mon, 09 Jan 2017 05:17:57 -0700

I'd like to use my 5k iMac as a secondary monitor and I'd like to connect my iPad pro to the 5k iMac. I would rather not use an app and prefer to use a hard wired solution. This could be achieved using Target Display Mode on older iMacs. Any feedback would be helpful.

⟐ Answer accepted 1월 09, 2017 at 5:17 GMT-7

iPad Pro 9.7": FPC connector on the iPad Pro 9.7

Mon, 17 Oct 2016 12:00:24 -0700

I'm attempting to locate the FPC connector that solders to the board for the 9.7" iPad Pro LCD. Has anyone had any luck sourcing a part?

⟐ Answered 10월 17, 2016 at 12:00 GMT-7

iPad Pro 9.7": OEM iPad Pro 9.7 LCD assembly sourcing

Sun, 18 Sep 2016 11:18:25 -0700

Can you please where to buy the subject? I have no access to Apple repair service in my country.

⟐ Commented 9월 18, 2016 at 11:18 GMT-7

iPad Pro 12.9" 5th Gen: How do I fix the smart connecter

Sun, 22 Mar 2026 21:14:56 -0700

My smart connecter corroded help

iPad Pro 10.5": Visually glitching when touching the bezel near the home button?

Sat, 14 Mar 2026 20:46:04 -0700

Has anyone ever seen this before? Know how it can happen or if there's a solution other than replacing the screen?

Alternatively, if it's just... left this way, will it get worse over time?

The screen works perfectly fine. But if you touch the bezel just about 1" to the right of the home button it glitches like crazy. As soon as you stop touching the bezel it goes back to normal.

I have taken a quick video, but can't upload video here. Some screenshots attached.

It does not do this with any part of the screen nor any other part of the bezel. Only specifically when touching the bezel in this exact space.

To be clear, a small bit of pressure is required. Just physical contact on that spot doesn't do anything, but a small amount of pressure (around the same amount to click the home button) produces these weird results.

First photo is screen working fine. Next photos are just some examples of the crazy chaotic glitching that can happen.

⟐ Answered 3월 14, 2026 at 20:46 GMT-7

iPad Pro 12.9" 2nd gen: Replacement lighting port price

Thu, 26 Feb 2026 17:14:50 -0700

Available and price of lighting port replacement

iPad Pro 13" (M5): Moisture Detected Message When Trying To Charge.

Wed, 25 Feb 2026 23:17:46 -0700

Bought brand new 2 months ago and it has never been near any water or any environment that will expose it to any moisture.,The charger and connection area look like new, no damage, carefully handled since new. It won't charger anymore and displays a message "Moisture Detected". The system is updated to the newest available. Purchased in Thailand at Apple Mobile Store, Apple Philippines refuse to look at it and say we must go back to where we bought it in Thailand 2 months ago. My guess is the sensor on the charger board or main board has triggered this message but we cannot get spare parts for it as it is so new. Great product & service huh.

iPad Pro 11" 2nd Gen: ID This Flex Cable

Wed, 21 Jan 2026 15:36:27 -0700

Can anyone identify this flex cable and let me know where I can purchase one? See the two images: the first shows the flex cable, and the other shows the position within the iPad; it is to the bottom left of the case.

iPad Pro: restarting after a couple minutes, Missing sensor(s): Tc1i Tc1x

Sun, 30 Nov 2025 09:03:41 -0700

IPad was working fine up until yesterday, started to restart every couple minutes. Grabbed the panic.full and entered it into a website, which told me it could be a software issue. Reset it through the recovery mode and it still resets by itself every 3 mins or so.

Now I want to open it up and look inside but can't find anything about these specific sensors. Any ideas?

{"bug_type":"210","timestamp":"2025-11-30 08:37:47.00 -0500","os_version":"iPhone OS 16.7.12 (20H364)","roots_installed":0,"incident_id":"35ED8459-61C0-40DE-9B3E-88411B9B7F97"}

{

"build" : "iPhone OS 16.7.12 (20H364)",

"product" : "iPad6,7",

"socId" : "8001",

"socRevision" : "10",

"incident" : "35ED8459-61C0-40DE-9B3E-88411B9B7F97",

"crashReporterKey" : "03eb87a8f9a7ffaf3704d9bfa30c3436ca6ed91e",

"kernel" : "Darwin Kernel Version 22.6.0: Tue Jul 2 20:45:41 PDT 2024; root:xnu-8796.142.1.703.8~1\/RELEASE_ARM64_S8000",

"date" : "2025-11-30 08:37:47.55 -0500",

"panicString" : "panic(cpu 0 caller 0xfffffff00e6a04fc): userspace watchdog timeout: no successful checkins from thermalmonitord\nservice returned not alive with context : is_alive_func returned unhealthy : current 1d7ffffff, mask 1ffffffff, expected 1ffffffff. SD: 0 BC: 0 RC: -1 BS: 0, Missing sensor(s): Tc1i Tc1x \nservice: backboardd, total successful checkins in 197 seconds: 19, last successful checkin: 0 seconds ago\nservice: SpringBoard, total successful checkins in 169 seconds: 17, last successful checkin: 0 seconds ago\nservice: mediaserverd, total successful checkins in 197 seconds: 18, last successful checkin: 0 seconds ago\nservice: logd, total successful checkins in 197 seconds: 19, last successful checkin: 0 seconds ago\nservice: thermalmonitord, no successful checkins in 197 seconds\nservice: runningboardd, total successful checkins in 197 seconds: 19, last successful checkin: 0 seconds ago\nservice: wifid, total successful checkins in 197 seconds: 17, last successful checkin: 0 seconds ago\nservice: configd, total successful checkins in 197 seconds: 16, last successful checkin: 0 seco\nDebugger message: panic\nMemory ID: 0x6\nOS release type: User\nOS version: 20H364\nKernel version: Darwin Kernel Version 22.6.0: Tue Jul 2 20:45:41 PDT 2024; root:xnu-8796.142.1.703.8~1\/RELEASE_ARM64_S8000\nKernelCache UUID: D64A923972F3E10F3B7B352B55EDC9EB\nKernel UUID: 65EDDC9F-FB45-3BCF-B2F0-FEB79BC3CFB7\nBoot session UUID: 35ED8459-61C0-40DE-9B3E-88411B9B7F97\niBoot version: iBoot-8422.142.2.700.1\nsecure boot?: YES\nroots installed: 0\nPaniclog version: 14\nKernel slide: 0x0000000007ab8000\nKernel text base: 0xfffffff00eabc000\nmach_absolute_time: 0x11a50e88a\nEpoch Time: sec usec\n Boot : 0x692c47da 0x000d2f2c\n Sleep : 0x00000000 0x00000000\n Wake : 0x00000000 0x00000000\n Calendar: 0x692c4898 0x000b62b7\n\nZone info:\n Zone map: 0xfffffff142000000 - 0xfffffff742000000\n . VM : 0xfffffff142000000 - 0xfffffff228664000\n . RO : 0xfffffff228664000 - 0xfffffff275330000\n . GEN0 : 0xfffffff275330000 - 0xfffffff35b994000\n . GEN1 : 0xfffffff35b994000 - 0xfffffff441ff8000\n . GEN2 : 0xfffffff441ff8000 - 0xfffffff528660000\n . GEN3 : 0xfffffff528660000 - 0xfffffff60ecc8000\n . DATA : 0xfffffff60ecc8000 - 0xfffffff742000000\n Metadata: 0xfffffff0021a4000 - 0xfffffff0039a4000\n Bitmaps : 0xfffffff0039a4000 - 0xfffffff004508000\n Extra : 0 - 0\n\nTPIDRx_ELy = {1: 0xfffffff35b216b78 0: 0x0000000000000000 0ro: 0x000000016d7270e0 }\nCORE 0 is the one that panicked. Check the full backtrace for details.\nCORE 1: PC=0x00000001e0d77054, LR=0x00000001a4141408, FP=0x000000016d44a7c0\nCompressor Info: 0% of compressed pages limit (OK) and 0% of segments limit (OK) with 0 swapfiles and OK swap space\nTotal cpu_usage: 46145980\nThread task pri cpu_usage\n0xfffffff35b216b78 watchdogd 97 0\n0xfffffff35ad2d6f0 backboardd 63 8474\n0xfffffff35ae27928 thermalmonitord 37 0\n0xfffffff35b5cb928 launchd 37 1\n0xfffffff35a99ab78 watchdogd 31 0\n\nPanicked task 0xfffffff35b371d70: 194 pages, 4 threads: pid 57: watchdogd\nPanicked thread: 0xfffffff35b216b78, backtrace: 0xfffffffb7d3e7150, tid: 1253\n\t\t lr: 0xfffffff00ec745cc fp: 0xfffffffb7d3e71c0\n\t\t lr: 0xfffffff00ed9860c fp: 0xfffffffb7d3e7230\n\t\t lr: 0xfffffff00ed976a8 fp: 0xfffffffb7d3e7300\n\t\t lr: 0xfffffff00ec3d594 fp: 0xfffffffb7d3e7310\n\t\t lr: 0xfffffff00ec74008 fp: 0xfffffffb7d3e76c0\n\t\t lr: 0xfffffff00f2da244 fp: 0xfffffffb7d3e76e0\n\t\t lr: 0xfffffff00e6a04fc fp: 0xfffffffb7d3e7700\n\t\t lr: 0xfffffff00e69fe88 fp: 0xfffffffb7d3e7720\n\t\t lr: 0xfffffff00e69f054 fp: 0xfffffffb7d3e7840\n\t\t lr: 0xfffffff00f268504 fp: 0xfffffffb7d3e79e0\n\t\t lr: 0xfffffff00ed69144 fp: 0xfffffffb7d3e7b00\n\t\t lr: 0xfffffff00ec79b48 fp: 0xfffffffb7d3e7b80\n\t\t lr: 0xfffffff00ec53004 fp: 0xfffffffb7d3e7be0\n\t\t lr: 0xfffffff00ec67398 fp: 0xfffffffb7d3e7c90\n\t\t lr: 0xfffffff00ec6779c fp: 0xfffffffb7d3e7d90\n\t\t lr: 0xfffffff00ed8f604 fp: 0xfffffffb7d3e7e40\n\t\t lr: 0xfffffff00ed97a18 fp: 0xfffffffb7d3e7f10\n\t\t lr: 0xfffffff00ec3d594 fp: 0xfffffffb7d3e7f20\n\n",

"panicFlags" : "0x802",

"bug_type" : "210",

"otherString" : "\n** Stackshot Succeeded Bytes Traced 200644 (Uncompressed 510976) \n",

"repairStatus" : "1",

"memoryStatus" : {"compressorSize":0,"compressions":0,"decompressions":0,"busyBufferCount":0,"memoryPressureDetails":{"pagesWanted":0,"pagesReclaimed":0},"pageSize":16384,"memoryPressure":false,"memoryPages":{"active":112304,"throttled":0,"fileBacked":141149,"wired":19961,"purgeable":4202,"inactive":71274,"free":11890,"speculative":40076}},

"processByPid" : {