What do u need to replace to fix this problem?

Thanks for help

⟐ Commented 10월 05, 2021 at 23:13 GMT-7

I didn't realize it for a few months, so I just removed the magnetized screw. Compass still does not work.

I've reset the phone and erased data etc. Still nothing.

Can I replace the compass? Any way to fix this?

⟐ Commented 5월 28, 2017 at 9:29 GMT-7

Any ideas what may cause this and how to fix it?

Update: after letting it rest overnight the screen looked fine first thing in the morning, however the white 'halo' reappeared shortly after. Heatsink issue?

⟐ Commented 7월 18, 2016 at 12:26 GMT-7

⟐ Commented 3월 12, 2023 at 11:51 GMT-7

Would much appreciate if somebody could help me please. The phone returned to myself from a customer, it worked fine previously but now it has stuck on Apple logo with progress bar screen after an update to iOS 10.2.1. It turns on, the progress bar goes to the end until 1mm of it stays unfilled and freezes. iTunes recognizes the phone, showing all the phone's details as usual (memory size, serial number, backups, etc). I left it for a few hours, but it still showing the same.

If I do a restore it restores, then freezes again at the end at the same stage, when iTunes already shows the screen with set up as a new iPhone or restore from backup options. I tried hard reset and restore in DFU mode, but still nothing.

If this is related to hardware and if someone had faced a similar problem please share, maybe I should try to reheat some components with a hot air station?

Many thanks!

⟐ Answered 2월 10, 2022 at 7:21 GMT-7

⟐ Answered 12월 20, 2020 at 14:49 GMT-7

Thank you!

⟐ Answered 12월 15, 2018 at 14:50 GMT-7

I got an defective iPhone 6 Plus and want to try and repair it myself. The problem is that i cant get any GSM reception. Here is what works and what i tried to resolve the problem:

All wireless connections like wifi and bluetooth are working (except but cellular ofc).

Everything else also works just fine. When i take out the sim card, it immediatelly tells me "no sim". If there is a sim installed, it either searches for reception like forever or just says no service. I also can see the imei and baseband number in settings. There are no signs of waterdamage whatsoever.

Today i replaced the upper antenna (the one with the plastic housing), the dock connector and the antenna cable connecting the dock with the logic board.

None of that worked.

Im starting to get a little desperate here :(

Does anyone have another idea which part could be broken? Is it the logicboard itself? Is there any way to further run some tests to find the source of the problem?

Maybe the simcard reader itself is damaged?

I would really appreciate some help/suggestions what to do.

⟐ Commented 12월 11, 2018 at 15:07 GMT-7

Any of you who use a microscope for repair phones? I need a microscope But dont know which i Should buy? I need one which is not too expensive But good enough for repair Logic board.

Suggestions? Maybe a eBay link og something? :) And which is Best, a microscope where you see The Logic board from a screen Or from a Lens???

Thanks :)

⟐ Commented 2월 13, 2025 at 11:32 GMT-7

I also have my iPhone X with a perfect screen, Face ID working also..

Decided to swap screens because i was curious to see the inside and work on them.

Swapped screens and neither Face ID work, i straight swapped them without removing anything from either screens.

I Follow some google steps by resetting settings etc on the originally broken phone because mine is jailbroken but still not working. I move the screens back to the original phones and they both work fine with Face ID..

What causes this? Am i missing something?

⟐ Commented 10월 04, 2020 at 7:54 GMT-7

recently cracked my screen on top..not on the useable part thank god! just enough to bug me so i figured i would go get a screen that's reasonable price.

what i ended up getting was the screen itself.not the whole LCD/Digitizer part,even tho i should have.

so I'm looking into doing the repair myself, being patient and just doing my research before i even attempt this , since my phone is still working great.

so i know how to get the screen off pretty much, its just the part after I'd like to have suggestions/tips for.

i have the screw driver set the whole works, what i dont have is the tape or glue i need, and i was wondering which glue i could use, is it possible that i could use one from a regular store, instead of buying online? any tips will help! thanks:)

⟐ Commented 1월 02, 2018 at 13:28 GMT-7

⟐ Answered 11월 18, 2017 at 0:35 GMT-7

Sometimes screens come with this tape of the connector circled mine did but I placed some insulating tape over it and low and behold it worked not a ghost click in sight hope this helps someone.

I will be keeping the phone over night to test it further and will update tomorrow thanks

⟐ Commented 2월 21, 2017 at 5:06 GMT-7

⟐ Answer deleted 8월 19, 2016 at 5:14 GMT-7

The Settings>Battery>Battery Health cannot display battery percentage.

⟐ Commented 10월 24, 2024 at 15:57 GMT-7

can anyone help me?? Dis Apple had a secret code like Samsung (*#0*#) ??

⟐ Commented 12월 07, 2022 at 14:29 GMT-7

I noticed that the housing of the iphone 6 consists of three parts. one part is the big middle part where the logo is, which includes the two metal parts enclosed by the plastic stipes (where the camera and flash are i.e.) and then the two metal bands one on top and one on the bottom (where headphone, lightning and speaker grill is).

These metal bands are not connected to the main "chassis", they are only attached with molded plastic and are therefore electrically isolated.

My question is, since internal parts are connected to these metal bands and the logic board also has a kind of connection to it, could it be that these bands are the antennas themselves ? and (i suspect so) do the have to be isolated from the main "chassis"?

the other explaination for this design could be that it is cheaper to build that way and that the "gaps" in the housing (the plastic stripes) are enough to allow antennas on the inside to work.

does anybody know more about this ?

Thank you very much,

Romazzino.

⟐ Commented 7월 14, 2022 at 22:07 GMT-7

I recently changed the screen of my iphone 6 (4.7") and the front camera was not working. When I opened the phone to check if the cable is connected it was. So I tested the camera while the screen was out of the shell body (all the cables were still connected) and the front camera was working just fine. I thought that I had a bad connection and put the screen back on. The camera stopped working again. I did this a few times and the same thing happens.

I have no idea what I am doing wrong, please help me!

Thanks

⟐ Commented 8월 04, 2020 at 15:37 GMT-7

⟐ Commented 1월 10, 2020 at 5:40 GMT-7

How can I fix it?

⟐ Answered 5월 12, 2018 at 9:19 GMT-7