폰을 크게 한번 떨어트린 이후로, 화면의 반이 나오지 않아요. 나오지 않는 부분이 터치 동작은 되는데... 아이픽스 홈페이지에 화면 교체 킷을 이용하면 다시 정상으로 수리할 수 있을지 궁금해요.

뒷면을 보면 화면이 안 나오는 쪽으로 안에 부품이 다 보이는데, 떨어뜨렸을 때 이쪽에서 작은 금속 조각이 떨어졌던 것 같기도 하지만 기억이 잘 안나요. 떨어진 것 같기도 하고 아무것도 안 떨어진 것 같기도 하고...

답변 감사드려요!

⟐ Answered 6월 11, 2026 at 21:30 GMT-7

⟐ Answered 5월 20, 2026 at 21:32 GMT-7

⟐ Edited by author 1월 26, 2026 at 7:52 GMT-7

The two screws Phillips/Philips 1.7mm screws in the picture are missing.

The name and role of the silver plate for quenching the screws in the picture, and the problem in the absence of the screws

Question - silver plate

1. Name
2. Role
3. Problems in the absence of a latching screw.

⟐ Edited by author 5월 12, 2025 at 9:11 GMT-7

⟐ Answered 3월 12, 2025 at 2:58 GMT-7

⟐ Answered 1월 22, 2025 at 11:13 GMT-7

I replaced the battery of my iPhone 15 Pro myself.

After the replacement, there is some lifting at the top of the screen, and even when pressed, there is a slight gap.

I’m not sure if it’s because of the top speaker grille or incomplete removal of the adhesive.

If you know how to resolve this issue, please let me know.

⟐ Answered 1월 22, 2025 at 10:44 GMT-7

거짓 제품입니다

환불해주세요

⟐ Answered 10월 01, 2024 at 14:33 GMT-7

⟐ Answered 3월 11, 2024 at 9:33 GMT-7

어디를 고쳐야할까요

⟐ Answer accepted 5월 23, 2022 at 1:58 GMT-7

I have faced a pretty weird issue on an iPhone 11 I recently repaired. The back housing and the screen were completely shattered, but fortunately i had a new housing pulled from a working phone.

I swapped the logicboard and all relevant components e.g. cameras, antennas etc. into the new housing, installed a refurbished OEM screen and transferred screen data onto the new one.

The phone works completely fine, Face ID is working, TrueTone is restored, BUT:

Tap to Wake does not work if the phone is placed on a flat surface, e.g. my desk.

The ridiculous part? The feature does work fine if I have the phone in my hands or a Lightning cable is plugged into the port (no need to even connect it to power!)

Tried another replacement screen —> problem persists.

Updated the phone from iOS 14.7.1 to iOS 15 Developer Beta 4 —> problem persists.

I assume a grounding issue inside the charging flex, so my next step would be to replace it with another OEM part. If this doesn’t resolve the issue, I’m pretty much at a loss.

Has anyone else faced this issue?

Thanks and greets from Germany!

⟐ Commented 6월 16, 2026 at 19:35 GMT-7

I'm trying to identify the component behind a recurring SMC panic on an iPhone 16 Pro Max (iPhone17,2).

• iPhone 16 Pro Max (iPhone17,2)
• Current iOS version installed
• Device had a liquid exposure / water damage incident approximately 3 months ago

• Phone boots normally
• All functions appear to work correctly
• Cellular, WiFi, Bluetooth, cameras, Face ID, charging, speakers and microphones appear functional
• No noticeable overheating
• No performance issues
• Device consistently reboots after approximately 2 minutes 50 seconds of uptime (~180 seconds)

I have collected multiple panic-full logs from different reboots.

All logs show the same panic:

SMC PANIC - ASSERT
SMC BSC failure, TAOC

Additional entries:

Misc(2) OUTBOX1 not ready

Sensor data:

S.sensor array 0 - 7 is:
0, 2097152, 0, 0, 0, 0, 0

F.sensor array 0 - 1 is:
0

The value is always:

2097152

which equals:

0x200000

• Opened device and visually inspected logic board and connectors
• No visible corrosion found
• No green residue
• No obvious liquid damage remains
• Cleaned accessible connectors with IPA (isopropyl alcohol)
• Reassembled device successfully
• Issue remains unchanged

Does anyone know what TAOC maps to on the iPhone 16 Pro Max / iPhone17,2?

Is TAOC:

• a temperature sensor?
• part of the USB-C / charging port assembly?
• a sensor on the lower daughterboard?
• a logic board sensor?
• another SMC-monitored peripheral?

Before moving to board-level repair I am considering replacing the complete lower USB-C / charging port assembly because of the previous liquid exposure.

Any information regarding TAOC, sensor array bit 0x200000, or similar cases would be greatly appreciated.

Thanks!

⟐ Commented 6월 16, 2026 at 3:56 GMT-7

⟐ Answered 6월 16, 2026 at 1:09 GMT-7

here it is. it looks like it’s never going to be fixed :(((

update: i can’t charge my phone

⟐ Commented 6월 15, 2026 at 23:23 GMT-7

⟐ Answer edited 6월 15, 2026 at 20:28 GMT-7

I've already tried several troubleshooting steps, including:

- Restarting the phone

- Updating the OS to the latest version

- Checking for carrier settings updates

- Reseating the SIM card in the tray

- Testing with a known-working SIM card

- Resetting the Network Settings

After performing these steps, the network will work for a short period before dropping out again. I'm starting to suspect a hardware issue, possibly related to the logic board (sandwich board separation) or an internal antenna connection.

Has anyone else experienced this specific behavior, and what was the ultimate fix? Does this sound like a common hardware failure for this model?

Thanks!

⟐ Answered 6월 14, 2026 at 11:34 GMT-7

***

⟐ Answered 6월 14, 2026 at 11:32 GMT-7