I’ve checked the antenna at the bottom of the phone and that seems fine. Everything else works including the audio without any issues!!

Thanks

⟐ Answered 2월 15, 2021 at 10:18 GMT-7

I would like to know if it cause by the screen replacement or by something else and possible solution

Thk

⟐ Commented 9월 30, 2020 at 8:43 GMT-7

⟐ Commented 10월 27, 2018 at 11:16 GMT-7

I attempted to repair a colleague’s iPhone X after his lightning port stopped charging. He got quite tired of having to charge wirelessly, so he reached out to me. I successfully replaced the lightning connector assembly, with everything still working.

The next day he texts me about an issue where his call quality for the receiver is terrible and not clear. I took a look at it. maybe I didn’t put in the mic correctly, so I opened it back up and double-checked if everything was in place. I also cleaned the holes a bit just to make sure that isn’t the issue. I also changed a few settings, like the “background noise reduction” etc.

The audio quality was a tiny bit better, but that didn’t fix it.

A few days later he texts again about it. My first thought was to just replace the lightning connector assembly, maybe I just got a faulty one, so I ordered it.

Yesterday I got it replaced successfully once again but still have the mic issues. I have one final idea to fix it. I got my hands on the gaskets (is that what you call them?) that prevent water from coming in. I’ll attempt to replace them tomorrow and keep my fingers crossed that it will fix the issue.

My question is (in case I fail with the gaskets): Do you have any other ideas on how to fix it? Have you ever experienced this problem? (if so, how did you fix it?)

Thanks a lot and stay safe everyone!

-JD

⟐ Commented 10월 01, 2024 at 12:05 GMT-7

⟐ Commented 10월 02, 2023 at 9:52 GMT-7

Is there a way to fix this? Would appreciate a help. I can do soldering if needed.

Thanks.

⟐ Answered 10월 27, 2022 at 8:56 GMT-7

⟐ Answered 7월 28, 2022 at 17:23 GMT-7

⟐ Answered 7월 24, 2022 at 20:29 GMT-7

I tried a hard reset, factory reset with itunes but the screen keeps black. Any suggestion? thanks

⟐ Commented 7월 14, 2021 at 15:06 GMT-7

I have iPhone X 64 GB and i have a isue that is pretty strange.

Mobile, have broken glass back and screen too, but i changed screen and the problem is still the same. Everything works, just one thing, that was before and after screenreplacement.

Rear camera doesn´t work on Camera app, front camera works fine, face id also, flash too, bet rear camera it just how to say stucks, freazes, it tries to focus and then show a image blury and freazes, if you try to focus somethin else you wait like 30 seconds and it focus that thing but still image is blurry and it doesn´t move, until you try to focus something else again and wait couple seconds and see again blurry dark picture.

If i go to Instagram app and try to open camera doesn´t work ether, but if i go to snapchat or messenger/facbook, rear camera working smoth as !&&*.

I tried to

• deactivet, activet location service.
• Reinstaled (factor settings)
• Hardreset
• DFU mode
• Updates

Help me, should i change camera lens or something to do with logicboard ( and logicboard i know nothing). Changing parts i can it´s easy.

⟐ Commented 4월 28, 2021 at 15:29 GMT-7

i hope you are well.

please find the attached image as I am struggling to get my iPhone X off emergency mode.

please help''

''

⟐ Answered 11월 27, 2020 at 23:51 GMT-7

⟐ Commented 11월 13, 2020 at 8:12 GMT-7

⟐ Commented 4월 30, 2020 at 6:39 GMT-7

⟐ Commented 4월 09, 2019 at 12:25 GMT-7

⟐ Answered 12월 07, 2018 at 2:49 GMT-7

i have done every reset possible, different sims, put original battery back in. Replaced the antenna cable bracket(With flex) on bottom, I also replaced the loud speaker flex (also known as interconnect flex cable ) being the cell antenna bracket connects to it. Still same issue. Anyone have any idea? Thanks

⟐ Commented 1월 22, 2021 at 4:23 GMT-7

I’ve tried putting the phone into DFU mode by pressing the volume up bottom, then the volume down button then the power button it then goes to the restore screen where it asks to plug it into itunes. Itunes doesn’t detect the phone at all, was expecting it to prompt me to restore and update like it normal does.

Have been thinking about replacing the battery to see if that’s the issue as it doesn’t seem to be taking charge at all

Any help would be massively appreciated

Hi everyone, the situation has now advanced in a good way! I disconnected the battery, disconnected the screen and then connected the battery back up. Pressed up, then down then held the sleep key and to be shock it detected the phone!

From here I restored the phone and updated to IOS 13. I’ve now got to the welcome stage of the phone on iTunes however when I connect the screen back up it goes back into a boot loop!

The screen appears to be the issue here I recon. Should I just get a new screen? I’ve checked the connections on the motherboard and they seem okay no visible damage or dust in there. Not too sure what to do

⟐ Commented 3월 17, 2024 at 12:36 GMT-7

⟐ Commented 2월 17, 2020 at 21:13 GMT-7

So I dropped my iPhone X in the sink. No big deal, I’ve done it a few times before and nothing has come of it. It’s IP67 rating, so it should’ve been fine. I understand now that the gasket wears out over time, but hindsight is 20/20.

A little while after I dried my iPhone off (it was still working perfectly), I put it in my pocket and forgot about it for a few hours. I take it out of my pocket to find that it was bootlooping.

I’ve looked all over online to see what the cause of this was, and I decided to open up my iPhone. The insides looked fine. There was a little condensation on the rear camera glass, but nothing major. I decide to try to boot the phone without the earpiece assembly plugged in, and it worked!

Great, I thought. I’ll just replace the assembly and all should be well. Then I look up how much it is, and see a note at the bottom of the page.

“The Earpiece Speaker and Sensor Assembly is paired to the logic board in an iPhone X. This assembly contains the flood illuminator, which is part of the Face ID security feature. Replacing this assembly will not restore Face ID functions. “

Now I feel like garbage. This is my personal phone, I’ve only had it for about a year, and my dreams of just replacing a part to get it like new again is gone.

Now for the questions. I understand that the earpiece assembly is paired to the logic board. Is there any way whatsoever to spoof the pairing of the two?

I didn’t find any visible damage on the assembly itself, not even the ribbon cable. But the connector on the logic board looks like it has a few dark spots on the top right few pins. Is there any way of cleaning the logic board up and possibly getting it to work?

Should I just cut my losses, lose face id, and just replace the assembly?

Should I just take the assembly out and lose the ability to use the speaker and have the iPhone adjust brightness levels automatically? Also along with face id?

In other words, I’m just looking for suggestions on what to do. Any help would be greatly appreciated.

⟐ Commented 3월 30, 2023 at 13:54 GMT-7

⟐ Answer edited 10월 18, 2024 at 1:03 GMT-7