1. Remove the front door window and front door module assembly. Refer to GW-34, "FRONT DOOR GLASS
-
-
AND REGULATOR" .
-
+
1. Remove the front door window and front door module assembly.
2. Separate the key cylinder rod and exterior handle rod connection (on the handle) if equipped.
-
3. Remove the screws (TORX T30) and the door lock assembly.
-
4. Disconnect the door lock actuator electrical connector.
-
-
5. Remove the exterior handle bolts, move the exterior handle
-
-
assembly backward, and then remove it from the panel in front
-
-
of the exterior handle escutcheon.
-
+
5 Remove the exterior handle bolts, move the exterior handle assembly backward, and then remove it from the panel in front of the exterior handle escutcheon.
Installation is in the reverse order of removal.
-
CAUTION:
-
-
To install each rod, be sure to rotate the rod holder until a click
-
-
is felt.
+
To install each rod, be sure to rotate the rod holder until a click is felt.
Removal and Installation EIS003IU
REMOVAL
1. Remove the front door window and front door module assembly. Refer to GW-34, "FRONT DOOR GLASS
AND REGULATOR" .
2. Separate the key cylinder rod and exterior handle rod connection (on the handle) if equipped.
3. Remove the screws (TORX T30) and the door lock assembly.
4. Disconnect the door lock actuator electrical connector.
5. Remove the exterior handle bolts, move the exterior handle
assembly backward, and then remove it from the panel in front
of the exterior handle escutcheon.
Installation is in the reverse order of removal.
CAUTION:
To install each rod, be sure to rotate the rod holder until a click
is felt.
[image|188310]