주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

도움말

현재 버전 게시자: oldturkey03 ,

텍스트:

bob stevenson, on a Panasonic the 2 blinks mean there is an issue with the 15volt rail and that it is down. The first check point is the D board, but the fault could lie on the A/PB/SS/SC/P boards because that is were the 15volt rail feeds to. It will help to narrow it down with you providing a serial, model or chassis number.
 
[image|195271image|195272]
[image|195271image|195272]

현황:

open

편집자: oldturkey03 ,

텍스트:

bob stevenson, on a Panasonic the 2 blinks mean there is an issue with the 15volt rail and that it is down. The first check point is the D board, but the fault could lie on the A/PB/SS/SC/P boards because that is were the 15volt rail feeds to. It will help to narrow it down with you providing a serial, model or chassis number.
 
[image|195271]

현황:

open

편집자: oldturkey03 ,

텍스트:

bob stevenson, on a Panasonic the 2 blinks meansmean there is an issue with the 15volt rail and that it is down. The first check point is the D board, but the fault could lie on the A/PB/SS/SC/P boards because that is were the 15volt rail feeds to. It will help to narrow it down with you providing a serial andserial, model or chassis number.
bob stevenson, on a Panasonic the 2 blinks meansmean there is an issue with the 15volt rail and that it is down. The first check point is the D board, but the fault could lie on the A/PB/SS/SC/P boards because that is were the 15volt rail feeds to. It will help to narrow it down with you providing a serial andserial, model or chassis number.

현황:

open

편집자: oldturkey03 ,

텍스트:

bob stevenson, on a Panasonic the 2 blinks means there is an issue with the 15volt rail is down. RheThe first check point is the D board, but the fault could lie on the A/PB/SS/SC/P boards because that is were the 15volt rail feeds to. It will help to narrow it down with you providing a serial and model or chassis number.
bob stevenson, on a Panasonic the 2 blinks means there is an issue with the 15volt rail is down. RheThe first check point is the D board, but the fault could lie on the A/PB/SS/SC/P boards because that is were the 15volt rail feeds to. It will help to narrow it down with you providing a serial and model or chassis number.

현황:

open

원문 게시자: oldturkey03 ,

텍스트:

bob stevenson, on a Panasonic the 2 blinks means there is an issue with the 15volt rail is down. Rhe first check point is the D board, but the fault could lie on the A/PB/SS/SC/P boards because that is were the 15volt rail feeds to. It will help to narrow it down with you providing a serial and model or chassis number.

현황:

open