주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: oldturkey03 ,

텍스트:

john, this camera does not have a separate battery for the clock. The date and time will reset whenever the camera is not supplied

power
power by the battery and/or the USB cradle for about 30 hours. Just in case you do not have it already, get the user manual [http://support.casio.com/pdf/001/EXS770_e.pdf|from here.]Page 192/193 gives the directions. You could also try to reset the camera to factory default by:
john, this camera does not have a separate battery for the clock. The date and time will reset whenever the camera is not supplied

power
power by the battery and/or the USB cradle for about 30 hours. Just in case you do not have it already, get the user manual [http://support.casio.com/pdf/001/EXS770_e.pdf|from here.]Page 192/193 gives the directions. You could also try to reset the camera to factory default by:
 
1. Press '''Menu'''
 
2. On the '''Set Up''' tab, select '''Reset''' and then press arrow arrow right.
 
3. Use arrow up or arrow down to select '''Reset''' and the press '''[Set]'''.
 
Hope this helps, good luck.

현황:

open

원문 게시자: oldturkey03 ,

텍스트:

john, this camera does not have a separate battery for the clock. The date and time will reset whenever the camera is not supplied

power by the battery and/or the USB cradle for about 30 hours. Just in case you do not have it already, get the user manual [http://support.casio.com/pdf/001/EXS770_e.pdf|from here.]Page 192/193 gives the directions. You could also try to reset the camera to factory default by:

1. Press '''Menu'''

2. On the '''Set Up''' tab, select '''Reset''' and then press arrow arrow right.

3. Use arrow up or arrow down to select '''Reset''' and the press '''[Set]'''.

Hope this helps, good luck.

현황:

open