주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

도움말

원문 게시자: Alfy ,

텍스트:

I don't think it's in deep enough. There's an easy way to getting it in easily.

I'll try to explain it best I can.

line up the cable and slide it in a little bit.

NEXT - crucial part

Use a flat head screw driver and you want to place it roughly in the middle of the cable between the cable and the aluminum case part. Use the screw driver to push the cable. Basically it would kinda look like a letter C.

\ = screw driver

C = Ribbon

What you want it to do is sort of have it like \C pressing a little bit with the tubing of the screw driver NOT the bit. Use your finger to slide it in. Don't put too much pressure with the screw driver or you might damage the cable. If you do enough of these you'll be able to do these without even using your finger!

현황:

open