주요 콘텐츠로 건너뛰기
도움말

원문 게시자: Jamie Horn ,

본문:

There's about 4 ways I found you can solve this problem.

Before a repair, take back off and follow steps up to and including the dock connector flex cable peeling back enough to see the "blue inductor coil" if present, continue repair.

Make sure that logic board is seated 100% correctly and that the speaker assembly has all 4 metal clips under the metal bezel.

Then make sure that the antenna cable is clicked on properly but be very gentle with it, try not to bed and push down lightly with spudger.

Make sure metal bracket is seated correctly under battery connector to ensure it makes contact with the back plate you put back on.

Hopefully this helps some people :)

현황:

open