주요 콘텐츠로 건너뛰기
도움말

현재 버전 작성자: rj713

텍스트:

-You want to try and reset the SMC and the PRAM first. This is done by first shutting down, removing all peripherals and the battery than holding the power button for 5+ seconds (SMC rest). Afterwords boot holding the command, option, p, r button combo and hold them till you hear the startup chime happen 3 times.
+You want to try and reset the SMC and the PRAM first. This is done by first shutting down, removing all peripherals and the battery then holding the power button for 5+ seconds (SMC rest). Afterwords boot holding the command, option, p, r button combo and hold them till you hear the startup chime happen 3 times.
If this does not help test an external monitor to see if that gets a picture.

현황:

open

원본 게시물 작성자: Xen

텍스트:

You want to try and reset the SMC and the PRAM first. This is done by first shutting down, removing all peripherals and the battery than holding the power button for 5+ seconds (SMC rest). Afterwords boot holding the command, option, p, r button combo and hold them till you hear the startup chime happen 3 times.

If this does not help test an external monitor to see if that gets a picture.

현황:

open