주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: iRobot ,

제목:

Power button won't work after wifi & screen replacement

텍스트:

So I had to replace the screen and during the process I ripped the wifi antenna. I ordered that and put it in no problem. Now before applying the Adhesive Strips I wanted to make sure everything worked. I tired holding the power button and it won't turn on (yes all the ribbon cables are attached). I plugged it into a power supply and it booted and the digitizer seemed to work ok, but not the power button.  To turn it off I had to unscrew the logic board and lift it from the battery packs.  Any ideas?

기기:

-iPad 2 Wi-Fi
+iPad 2 Wi-Fi EMC 2415

현황:

open

편집자: iRobot ,

제목:

Power button won't work after wifi & screen replacement

텍스트:

So I had to replace the screen and during the process I ripped the wifi antenna. I ordered that and put it in no problem. Now before applying the Adhesive Strips I wanted to make sure everything worked. I tired holding the power button and it won't turn on (yes all the ribbon cables are attached). I plugged it into a power supply and it booted and the digitizer seemed to work ok, but not the power button.  To turn it off I had to unscrew the logic board and lift it from the battery packs.  Any ideas?

기기:

iPad 2 Wi-Fi

현황:

open

편집자: Walter Galan ,

제목:

Power button won't work after wifi & screen replacement

텍스트:

So I had to replace the screen and during the process I ripped the wifi antenna. I ordered that and put it in no problem. Now before applying the Adhesive Strips I wanted to make sure everything worked. I tired holding the power button and it won't turn on (yes all the ribbon cables are attached). I plugged it into a power supply and it booted and the digitizer seemed to work ok, but not the power button.  To turn it off I had to unscrew the logic board and lift it from the battery packs.  Any ideas?

기기:

-iPad 2 Wi-Fi A1395
+iPad 2 Wi-Fi

현황:

open

원문 게시자: Brian ,

제목:

Power button won't work after wifi & screen replacement

텍스트:

So I had to replace the screen and during the process I ripped the wifi antenna. I ordered that and put it in no problem. Now before applying the Adhesive Strips I wanted to make sure everything worked. I tired holding the power button and it won't turn on (yes all the ribbon cables are attached). I plugged it into a power supply and it booted and the digitizer seemed to work ok, but not the power button.  To turn it off I had to unscrew the logic board and lift it from the battery packs.  Any ideas?

기기:

iPad 2 Wi-Fi A1395

현황:

open