주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: oldturkey03 ,

텍스트:

-twbranch, I just checked the schematic and what you are looking at is a 250ohm ferrite bead, used for EMI control. you might just apply a jumper which would allow you to at least check to see if the circuit is working. Only thing you might experience is higher interference. this is a common part and should be available at places like mouser.com or digikey.com. Hope this helps, good luck.
+twbranch, I just checked the schematic and what you are looking at is a 250ohm ferrite bead, used for EMI control. You might just apply a jumper which would allow you to at least check to see if the circuit is working. Only thing you might experience is higher interference. This is a common part and should be available at places like Mouser.com or Digikey.com. Hope this helps, good luck.
[image|247158|align=left]

현황:

open

원문 게시자: oldturkey03 ,

텍스트:

twbranch, I just checked the schematic and what you are looking at is a 250ohm ferrite bead, used for EMI control. you might just apply a jumper which would allow you to at least check to see if the circuit is working. Only thing you might experience is higher interference. this is a common part and should be available at places like mouser.com or digikey.com. Hope this helps, good luck.

[image|247158|align=left]

현황:

open