주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: Dan ,

텍스트:

Can you take some hi resolution pics of the area when the pin is now missing and one just back a bit so we can ID that part of the logic board. So we can see the damage and ID what the circuit is.
-== Update ==
+== Update ==
-Well I did some more investigating and was able to locate on the schematic for this system. The pins as it turns out are tied to the chassis ground.
+Well I did some more investigating and was able to locate on the schematic for this system. The pins as it turns out are tied to the chassis ground.
-So one has to assume this are fixture guides used in the assembly process or Apple thought they needed an EMI shield to cover over the PCB as they are laid out in a pattern.
+So one has to assume these are fixture guides used in the assembly process or Apple thought they needed an EMI shield to cover over the PCB as they are laid out in a pattern.
[image|276023|align=left]

현황:

open

편집자: Dan ,

텍스트:

Can you take some hi resolution pics of the area when the pin is now missing and one just back a bit so we can ID that part of the logic board. So we can see the damage and ID what the circuit is.
- == Update ==
- Well I did some more investigating and was able to locate on the schematic for this system. The pins as it turns out are tied to the chassis ground. So one has to assume this are fixture guides used in the assembly process.
+== Update ==
+Well I did some more investigating and was able to locate on the schematic for this system. The pins as it turns out are tied to the chassis ground.
+So one has to assume this are fixture guides used in the assembly process or Apple thought they needed an EMI shield to cover over the PCB as they are laid out in a pattern.
-[image|276023]
+[image|276023|align=left]

현황:

open

편집자: Dan ,

텍스트:

Can you take some hi resolution pics of the area when the pin is now missing and one just back a bit so we can ID that part of the logic board. So we can see the damage and ID what the circuit is.
+ == Update ==
+
+ Well I did some more investigating and was able to locate on the schematic for this system. The pins as it turns out are tied to the chassis ground. So one has to assume this are fixture guides used in the assembly process.
+
+
+
+[image|276023]

현황:

open

원문 게시자: Dan ,

텍스트:

Can you take some hi resolution pics of the area when the pin is now missing and one just back a bit so we can ID that part of the logic board. So we can see the damage and ID what the circuit is.

현황:

open