주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: iRobot ,

제목:

No backlight on external display

텍스트:

This one is throwing me for a loop.

Late 2009 MacBook connected to an external DVI display via DVI cable and DVI -> mini Displayport / Thunderbolt adapter.  The MacBook's built in display operates with no issue but the external display gets backlight for 2 -3 seconds then goes dark, though video is still available if you shine a light on the display.

Issue has persisted across two different displays (one Samsung, one Viewsonic), with two different DVI cables, two different power cables for the displays and two different DVI adapters. Both displays worked properly with a known good Mac so I really doubt they are to blame.

I've done the following with no change in performance:

* Reset SMC
* Reset PRAM
* Reset NVRAM
* Safe Boot
* Booted to KG OS on external drive

At this point I'm ready to call it a bad logic board but with the Mac being out of warranty I want to make sure I'm exhausting all options.  I've never seen this particular issue before but would be more accepting of it if I knew others have run into it.

Any ideas?  Any similar experiences?

기기:

MacBook Unibody Model A1342

현황:

openclosed
openclosed

편집자: LikeARabbit ,

제목:

No backlight on external display

텍스트:

This one is throwing me for a loop.
 
Late 2009 MacBook connected to an external DVI display via DVI cable and DVI -> mini Displayport / Thunderbolt adapter. The MacBook's built in display operates with no issue but the external display gets backlight for 2 -3 seconds then goes dark, though video is still available if you shine a light on the display.
 
Issue has persisted across two different displays (one Samsung, one Viewsonic), with two different DVI cables, two different power cables for the displays and two different DVI adapters. Both displays worked properly with a known good MacMac so I really doubt they are to blame.
Issue has persisted across two different displays (one Samsung, one Viewsonic), with two different DVI cables, two different power cables for the displays and two different DVI adapters. Both displays worked properly with a known good MacMac so I really doubt they are to blame.
 
I've done the following with no change in performance:
 
* Reset SMC
* Reset PRAM
* Reset NVRAM
* Safe Boot
* Booted to KG OS on external drive
 
At this point I'm ready to call it a bad logic board but with the Mac being out of warranty I want to make sure I'm exhausting all options. I've never seen this particular issue before but would be more accepting of it if I knew others have run into it.
 
Any ideas? Any similar experiences?

기기:

MacBook Unibody Model A1342

현황:

open

원문 게시자: LikeARabbit ,

제목:

No backlight on external display

텍스트:

This one is throwing me for a loop.

Late 2009 MacBook connected to an external DVI display via DVI cable and DVI -> mini Displayport / Thunderbolt adapter.  The MacBook's built in display operates with no issue but the external display gets backlight for 2 -3 seconds then goes dark, though video is still available if you shine a light on the display.

Issue has persisted across two different displays (one Samsung, one Viewsonic), with two different DVI cables, two different power cables for the displays and two different DVI adapters. Both displays worked properly with a known good Mac.

I've done the following with no change in performance:

* Reset SMC
* Reset PRAM
* Reset NVRAM
* Safe Boot
* Booted to KG OS on external drive

At this point I'm ready to call it a bad logic board but with the Mac being out of warranty I want to make sure I'm exhausting all options.  I've never seen this particular issue before but would be more accepting of it if I knew others have run into it.

Any ideas?  Any similar experiences?

기기:

MacBook Unibody Model A1342

현황:

open