주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말

현재 버전 게시자: oldturkey03 (투표 내용) ,

제목:

waterdamage MacBook a1342 no jump start. help!

텍스트:

hey guys so ive followed all the steps online showing how to test and repair water damage a1342 macbook. i ahve searched everywhere and so far everyones macbooks has been fixed by jumpstarting it. (except mine haha)

the board its self looks flawless. i do not see any corrosion or damaged connectors.

i have completely removed and cleaned logic board and ram. no luck. i also replaced the ram from my MBP and still no response.

i was going to do a system management controller reset but unfortunately it will not power on to do so.

i have tested my power supply and it is working fine. charged my MBP no problem.

my next step was to try and jump start the unit. when i go to do this the fan fires up for a quick spin then shuts down before the laptop can fire. no harddrive or mac sounds. i have tried this with the laptop plugged in and running on just battery. i get the same fan spin for a second then fail. if i hold my bridged connection in the exact right spot the fan will continually run in 1 second boot intervals but not fire and continue running.

my next question would be what should i test next? i read about people testing components with a multimeter. i am not familiar on how to do this and would apprecaite any assistance you can give.

i really dont want to have to go out any purchase expensive parts before i have tested and exhausted all other options. i would really appreciate any help i can get on this issue thanks.

기기:

MacBook Unibody Model A1342

현황:

open

승인된 답변:

143458

편집자: originalmachead ,

제목:

waterdamage MacBook a1342 no jump start. help!

텍스트:

hey guys so ive followed all the steps online showing how to test and repair water damage a1342 macbook. i ahve searched everywhere and so far everyones macbooks has been fixed by jumpstarting it. (except mine haha)

the board its self looks flawless. i do not see any corrosion or damaged connectors.

i have completely removed and cleaned logic board and ram. no luck. i also replaced the ram from my MBP and still no response.

i was going to do a system management controller reset but unfortunately it will not power on to do so.

i have tested my power supply and it is working fine. charged my MBP no problem.

my next step was to try and jump start the unit. when i go to do this the fan fires up for a quick spin then shuts down before the laptop can fire. no harddrive or mac sounds. i have tried this with the laptop plugged in and running on just battery. i get the same fan spin for a second then fail. if i hold my bridged connection in the exact right spot the fan will continually run in 1 second boot intervals but not fire and continue running.

my next question would be what should i test next? i read about people testing components with a multimeter. i am not familiar on how to do this and would apprecaite any assistance you can give.

i really dont want to have to go out any purchase expensive parts before i have tested and exhausted all other options. i would really appreciate any help i can get on this issue thanks.

기기:

MacBook Unibody Model A1342

현황:

open

편집자: originalmachead ,

제목:

waterdamage MacBook a1342 no jump start. help!

텍스트:

hey guys so ive followed all the steps online showing how to test and repair water damage a1342 macbook. i ahve searched everywhere and so far everyones macbooks has been fixed by jumpstarting it. (except mine haha)
 
the board its self looks flawless. i do not see any corrosion or damaged connectors.
 
i have completely removed and cleaned logic board and ram. no luck. i also replaced the ram from my MBP and still no response.
 
i was going to do a system management controller reset but unfortunately it will not power on to do so.
 
i have tested my power supply and it is working fine. charged my MBP no problem.
 
my next step was to try and jump start the unit. when i go to do this the fan fires up for a quick spin then shuts down before the laptop can fire. no harddrive or mac sounds. i have tried this with the laptop plugged in and running on just battery. i get the same fan spin for a second then fail. if i hold my bridged connection in the exact right spot the fan will continually run in 1 second boot intervals but not fire and continue running.
my next step was to try and jump start the unit. when i go to do this the fan fires up for a quick spin then shuts down before the laptop can fire. no harddrive or mac sounds. i have tried this with the laptop plugged in and running on just battery. i get the same fan spin for a second then fail. if i hold my bridged connection in the exact right spot the fan will continually run in 1 second boot intervals but not fire and continue running.
 
my next question would be what should i test next? i read about people testing components with a multimeter. i am not familiar on how to do this and would apprecaite any assistance you can give.
 
i really dont want to have to go out any purchase expensive parts before i have tested and exhausted all other options. i would really appreciate any help i can get on this issue thanks.

기기:

MacBook Unibody Model A1342

현황:

open

편집자: gfunk ,

제목:

waterdamage MacBook a1342 no jump start. help!

텍스트:

hey guys so ive followed all the steps online showing how to test and repair water damage a1342 macbook. i ahve searched everywhere and so far everyones macbooks has been fixed by jumpstarting it. (except mine haha)
 
the board its self looks flawless. i do not see any corrosion or damaged connectors.
 
i have completely removed and cleaned logic board and ram. no luck. i also replaced the ram from my MBP and still no response.
 
i was going to do a system management controller reset but unfortunately it will not power on to do so.
 
i have tested my power supply and it is working fine. charged my MBP no problem.
 
my next step was to try and jump start the unit. when i go to do this the fan fires up for a quick spin then shuts down before the laptop can fire. no harddrive or mac sounds. i have tried this with the laptop plugged in and running on just battery. i get the same fan spin for a second then fail. if i hold my bridged connection in the exact right spot the fan will continually run in 1 second boot intervals but not fire and continue running.
my next step was to try and jump start the unit. when i go to do this the fan fires up for a quick spin then shuts down before the laptop can fire. no harddrive or mac sounds. i have tried this with the laptop plugged in and running on just battery. i get the same fan spin for a second then fail. if i hold my bridged connection in the exact right spot the fan will continually run in 1 second boot intervals but not fire and continue running.
 
my next question would be what should i test next? i read about people testing components with a multimeter. i am not familiar on how to do this and would apprecaite any assistance you can give.
my next question would be what should i test next? i read about people testing components with a multimeter. i am not familiar on how to do this and would apprecaite any assistance you can give.
 
my guess is either the logic board or battery ??

i
i really dont want to have to go out any purchase new battery, logic board, ectexpensive parts before i have tested and exhausted all other options. i would really appreciate any help i can get on this issue thanks.
my guess is either the logic board or battery ??

i
i really dont want to have to go out any purchase new battery, logic board, ectexpensive parts before i have tested and exhausted all other options. i would really appreciate any help i can get on this issue thanks.

기기:

MacBook Unibody Model A1342

현황:

open

원문 게시자: gfunk ,

제목:

waterdamage MacBook a1342 no jump start. help!

텍스트:

hey guys so ive followed all the steps online showing how to test and repair water damage a1342 macbook. i ahve searched everywhere and so far everyones macbooks has been fixed by jumpstarting it. (except mine haha)

the board its self looks flawless. i do not see any corrosion or damaged connectors.

i have completely removed and cleaned logic board and ram. no luck. i also replaced the ram from my MBP and still no response.

i was going to do a system management controller reset but unfortunately it will not power on to do so.

i have tested my power supply and it is working fine. charged my MBP no problem.

my next step was to try and jump start the unit. when i go to do this the fan fires up for a quick spin then shuts down before the laptop can fire. no harddrive or mac sounds.

my next question would be what should i test next?

my guess is either the logic board or battery ??

i really dont want to have to go out any purchase new battery, logic board, ect and would appreciate any help i can get thanks.

기기:

MacBook Unibody Model A1342

현황:

open