주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: iRobot ,

제목:

Cannot format new HDD under 10.6?

텍스트:

There is a lot of discussion all over the web about it, but i couldn't find a solution yet. When i try to erase or format a brand new ATA 1.8" 80GB drive (Samsung HS082HB/A) using disk utility i get this error message "POSIX reports: The operation couldn’t be completed. Cannot allocate memory"

Under 10.5 it's similar, it only says i/o error instead. The disk seems to be named nearly randomly, things like SAISQNC or else and sometimes it shows a capaticy above 2 PB.

I think its the disk controller or the ZIF cable. Great if somebody has a different suggestion.

기기:

-MacBook Air 13" Models A1237 and A1304
+MacBook Air Models A1237 and A1304

현황:

open

편집자: iRobot ,

제목:

Cannot format new HDD under 10.6?

텍스트:

There is a lot of discussion all over the web about it, but i couldn't find a solution yet. When i try to erase or format a brand new ATA 1.8" 80GB drive (Samsung HS082HB/A) using disk utility i get this error message "POSIX reports: The operation couldn’t be completed. Cannot allocate memory"

Under 10.5 it's similar, it only says i/o error instead. The disk seems to be named nearly randomly, things like SAISQNC or else and sometimes it shows a capaticy above 2 PB.

I think its the disk controller or the ZIF cable. Great if somebody has a different suggestion.

기기:

-MacBook Air
+MacBook Air 13" Models A1237 and A1304

현황:

open

편집자: iRobot ,

제목:

Cannot format new HDD under 10.6?

텍스트:

There is a lot of discussion all over the web about it, but i couldn't find a solution yet. When i try to erase or format a brand new ATA 1.8" 80GB drive (Samsung HS082HB/A) using disk utility i get this error message "POSIX reports: The operation couldn’t be completed. Cannot allocate memory"

Under 10.5 it's similar, it only says i/o error instead. The disk seems to be named nearly randomly, things like SAISQNC or else and sometimes it shows a capaticy above 2 PB.

I think its the disk controller or the ZIF cable. Great if somebody has a different suggestion.

기기:

MacBook Air

현황:

open

편집자: David Hodson ,

제목:

Cannot format new HDD under 10.6?

텍스트:

There is a lot of discussion all over the web about it, but i couldn't find a solution yet. When i try to erase or format a brand new ATA 1.8" 80GB drive (Samsung HS082HB/A) using disk utility i get this error message "POSIX reports: The operation couldn’t be completed. Cannot allocate memory"

Under 10.5 it's similar, it only says i/o error instead. The disk seems to be named nearly randomly, things like SAISQNC or else and sometimes it shows a capaticy above 2 PB.

I think its the disk controller or the ZIF cable. Great if somebody has a different suggestion.

기기:

-macbook air 1.6gb Original Model
+MacBook Air

현황:

open

원문 게시자: remacberlin ,

제목:

Cannot format new HDD under 10.6?

텍스트:

There is a lot of discussion all over the web about it, but i couldn't find a solution yet. When i try to erase or format a brand new ATA 1.8" 80GB drive (Samsung HS082HB/A) using disk utility i get this error message "POSIX reports: The operation couldn’t be completed. Cannot allocate memory"

Under 10.5 it's similar, it only says i/o error instead. The disk seems to be named nearly randomly, things like SAISQNC or else and sometimes it shows a capaticy above 2 PB.

I think its the disk controller or the ZIF cable. Great if somebody has a different suggestion.

기기:

macbook air 1.6gb Original Model

현황:

open