Skip to main content
도움말

현재 버전 게시자: oldturkey03 ,

본문:

Zaef89zaef89, just to be a tie breaker here. Thathere :-)That part is reference designator SP1_RF which is the spring _Upper_ antenna-N90. It is unrelated to your digitizer. Check your 343S0499 touch controller and see if a reflow could fix this. Of course you will have to check your logic board for any other missing, broken, or burned components. Hope this helps, good luck.
Zaef89zaef89, just to be a tie breaker here. Thathere :-)That part is reference designator SP1_RF which is the spring _Upper_ antenna-N90. It is unrelated to your digitizer. Check your 343S0499 touch controller and see if a reflow could fix this. Of course you will have to check your logic board for any other missing, broken, or burned components. Hope this helps, good luck.
 
[image|337433|align=left]
 
[image|337434|align=left]

현황:

open

원문 게시자: oldturkey03 ,

본문:

Zaef89, just to be a tie breaker here. That part is reference designator SP1_RF which is the spring _Upper_ antenna-N90. It is unrelated to your digitizer. Check your 343S0499 touch controller and see if a reflow could fix this. Of course you will have to check your logic board for any other missing, broken, or burned components. Hope this helps, good luck.

[image|337433|align=left]

[image|337434|align=left]

현황:

open