메인 콘텐츠로 스킵하기
도움말

현재 버전 게시자: Nick ,

본문:

Look online for a used one or a good quality aftermarket one. If you need both, spend the extra money and get a monitor that comes with one.
 
If you have a monitor and need one,I would look for a usedhigh quality aftermarket one online or buy a compatible replacement that is well built and tested for safety. Thesewith actual safety credentials. Yes, these cost more then a generic imported onethe average eBay adapter but it will be lessyou know it's probably just as safe as the OEM adapter and isn't as likely to damagekill the monitor or burn anything down because it failed.if something goes wrong. However, I'd still prefer going eith an Apple OEM is still preferred. The main problem is the adapter each Cinema Display varies. You need toadapter. As long as you know which one you are going to need beforefor the size you buy oneare looking at, you'll be fine. Look up '''Apple Cinema Display Power Supply''' and you'll probably get somewhere.
If you have a monitor and need one,I would look for a usedhigh quality aftermarket one online or buy a compatible replacement that is well built and tested for safety. Thesewith actual safety credentials. Yes, these cost more then a generic imported onethe average eBay adapter but it will be lessyou know it's probably just as safe as the OEM adapter and isn't as likely to damagekill the monitor or burn anything down because it failed.if something goes wrong. However, I'd still prefer going eith an Apple OEM is still preferred. The main problem is the adapter each Cinema Display varies. You need toadapter. As long as you know which one you are going to need beforefor the size you buy oneare looking at, you'll be fine. Look up '''Apple Cinema Display Power Supply''' and you'll probably get somewhere.
 
I don't think these can be modifiedwould forget about modification to take an internal power supply, so that's probably out of the question. I think this will bemonitor - it likely doesn't have the case because of howhardware for AC->DC conversion on the monitor itself, which is designed. The power cord that goes to the power supply is permanently installed in the monitor so it's not easy to remove and replace with say, a IEC socket or even a standard power brick. It may still be possible but I wouldn't do it. This would also destroy the resale value of the monitor as well. It's probably easier to getwhy Apple uses an external power supply.

You
I'm sure it can probably find a compatible supply by searching something like '''Apple Cinema Display Power Supply''' and looking for a good quality generic one. If you can't, buy the Apple OEM one rather then a generic replacementstill be done, but it isn't going to be practical.
I don't think these can be modifiedwould forget about modification to take an internal power supply, so that's probably out of the question. I think this will bemonitor - it likely doesn't have the case because of howhardware for AC->DC conversion on the monitor itself, which is designed. The power cord that goes to the power supply is permanently installed in the monitor so it's not easy to remove and replace with say, a IEC socket or even a standard power brick. It may still be possible but I wouldn't do it. This would also destroy the resale value of the monitor as well. It's probably easier to getwhy Apple uses an external power supply.

You
I'm sure it can probably find a compatible supply by searching something like '''Apple Cinema Display Power Supply''' and looking for a good quality generic one. If you can't, buy the Apple OEM one rather then a generic replacementstill be done, but it isn't going to be practical.

현황:

open

편집 작업: Nick ,

본문:

Look online for a used one or a good quality aftermarket one. If you need both, spend the extra money and get a monitor that comes with one.
If
If
you have a monitor and need one, look for a used one online or buy a compatible replacement that is well built and tested for safety. These cost more then a generic imported one but it will be less likely to damage the monitor or burn anything down because it failed. Apple OEM is still preferred.
The
The main problem is the adapter each Cinema Display varies. You need to know which one you are going to need before you buy one.
Due to this I would say try and find one of the supplies that are compatible with the cinema display you want first.
If
If
you have a monitor and need one, look for a used one online or buy a compatible replacement that is well built and tested for safety. These cost more then a generic imported one but it will be less likely to damage the monitor or burn anything down because it failed. Apple OEM is still preferred.
The
The main problem is the adapter each Cinema Display varies. You need to know which one you are going to need before you buy one.
Due to this I would say try and find one of the supplies that are compatible with the cinema display you want first.
 
I don't think these can be modified to take an internal power supply, so that's probably out of the question. I think this will be the case because of how the monitor is designed. The power cord that goes to the power supply is permanently installed in the monitor so it's not easy to remove and replace with say, a IEC socket or even a standard power brick. It may still be possible but I wouldn't do it. This would also destroy the resale value of the monitor as well. It's probably easier to get an external power supply.
 
You can probably find a compatible supply by searching something like '''Apple Cinema Display Power Supply''' and looking for a good quality generic one. If you can't, buy the Apple OEM one rather then a generic replacement.

현황:

open

편집 작업: Nick ,

본문:

I would sayLook online for a used one or a good quality aftermarket one. If you need both, spend the extra money and get a monitor that comes with one.
If you have a monitor and need one, look for a used one online or buy a compatible replacement that is well built and tested for safety. These cost more then a generic imported one but
it maywill be worth consideringless likely to damage the internal mod, but theremonitor or burn anything down because it failed. Apple OEM is still preferred.
The main problem is the adapter each Cinema Display varies. You need to know which one you
are a ton of these external power supplies on eBay. Duegoing to need before you buy one.
Due
to this I would say try and find one of the supplies that are compatible with the cinema display you want first. I also know there's a market for compatible supplies for these too but I would get a known good Apple one if given the choice.
I


I
don't think these can be modded internallymodified to take an internal power supply, so that's probably out of the question. I think this will be the case because of how the portmonitor is designed(permanent internaldesigned. The power cord that goes to athe power brick), you can't removesupply is permanently installed in the cordmonitor so it's not easy to remove and there probably isn't enough room for an internal mod.replace with say, a IEC socket or even a standard power brick. It may still be possible but I wouldn't do it. This would justalso destroy the resale value of the monitor as well. It's probably easier to get aan external power supply, honestly.
The eBay link
supply.

You can probably find a compatible supply by searching something like '''Apple Cinema Display Power Supply''' and looking
for whata good quality generic one. If you want is below butcan't, buy the seller quit eBay. Look upApple OEM one based on the information and recommendations in the [http://www.ebay.com/itm/Power-Adapter-for-Apple-23-Cinema-HD-Display-Compatible-Apple-90W-A1097-/161320318215?pt=PCA_UPS&hash=item258f70b507|ad on eBay]rather then a generic replacement.
I would sayLook online for a used one or a good quality aftermarket one. If you need both, spend the extra money and get a monitor that comes with one.
If you have a monitor and need one, look for a used one online or buy a compatible replacement that is well built and tested for safety. These cost more then a generic imported one but
it maywill be worth consideringless likely to damage the internal mod, but theremonitor or burn anything down because it failed. Apple OEM is still preferred.
The main problem is the adapter each Cinema Display varies. You need to know which one you
are a ton of these external power supplies on eBay. Duegoing to need before you buy one.
Due
to this I would say try and find one of the supplies that are compatible with the cinema display you want first. I also know there's a market for compatible supplies for these too but I would get a known good Apple one if given the choice.
I


I
don't think these can be modded internallymodified to take an internal power supply, so that's probably out of the question. I think this will be the case because of how the portmonitor is designed(permanent internaldesigned. The power cord that goes to athe power brick), you can't removesupply is permanently installed in the cordmonitor so it's not easy to remove and there probably isn't enough room for an internal mod.replace with say, a IEC socket or even a standard power brick. It may still be possible but I wouldn't do it. This would justalso destroy the resale value of the monitor as well. It's probably easier to get aan external power supply, honestly.
The eBay link
supply.

You can probably find a compatible supply by searching something like '''Apple Cinema Display Power Supply''' and looking
for whata good quality generic one. If you want is below butcan't, buy the seller quit eBay. Look upApple OEM one based on the information and recommendations in the [http://www.ebay.com/itm/Power-Adapter-for-Apple-23-Cinema-HD-Display-Compatible-Apple-90W-A1097-/161320318215?pt=PCA_UPS&hash=item258f70b507|ad on eBay]rather then a generic replacement.

현황:

open

편집 작업: Nick ,

본문:

I would say it may be worth considering repairing it,the internal mod, but there are a ton of these external power supplies on eBay. Due to this I would say try and find one of the supplies that are compatible with the cinema display you want first. I also know there's a market for compatible supplies for these too but I would get a known good Apple one if given the choice.
I don't think these can be modded internally because of how the port is designed(permanent internal cord to a power brick),
you havecan't remove the capacity, knowledgecord and experience to do so
You could try this
there probably isn't enough room for an internal mod. I would just get a external power supply:http://www.ebay.com/itm/Power-Adapter-for-Apple-23-Cinema-HD-Display-Compatible-Apple-90W-A1097-/161320318215?pt=PCA_UPS&hash=item258f70b507supply, honestly.
The eBay link for what you want is below but the seller quit eBay. Look up one based on the information and recommendations in the [http://www.ebay.com/itm/Power-Adapter-for-Apple-23-Cinema-HD-Display-Compatible-Apple-90W-A1097-/161320318215?pt=PCA_UPS&hash=item258f70b507|ad on eBay].
I would say it may be worth considering repairing it,the internal mod, but there are a ton of these external power supplies on eBay. Due to this I would say try and find one of the supplies that are compatible with the cinema display you want first. I also know there's a market for compatible supplies for these too but I would get a known good Apple one if given the choice.
I don't think these can be modded internally because of how the port is designed(permanent internal cord to a power brick),
you havecan't remove the capacity, knowledgecord and experience to do so
You could try this
there probably isn't enough room for an internal mod. I would just get a external power supply:http://www.ebay.com/itm/Power-Adapter-for-Apple-23-Cinema-HD-Display-Compatible-Apple-90W-A1097-/161320318215?pt=PCA_UPS&hash=item258f70b507supply, honestly.
The eBay link for what you want is below but the seller quit eBay. Look up one based on the information and recommendations in the [http://www.ebay.com/itm/Power-Adapter-for-Apple-23-Cinema-HD-Display-Compatible-Apple-90W-A1097-/161320318215?pt=PCA_UPS&hash=item258f70b507|ad on eBay].

현황:

open

편집 작업: Nick ,

본문:

I would say it may be worth considering repairing it, if you have the capacity, knowledge and experience to do so
You could try this power supply:http://www.ebay.com/itm/Power-Adapter-for-Apple-23-Cinema-HD-Display-Compatible-Apple-90W-A1097-/161320318215?pt=PCA_UPS&hash=item258f70b507

현황:

open

원문 게시자: Nick ,

본문:

I would say it may be worth considering repairing it, if you have the capacity, knowledge and experience to do so

현황:

open