주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: oldturkey03 (투표 내용) ,

제목:

stuck on battery charging sign not booting into the OS

텍스트:

Hi Everyone!.

So i bought a retina macbook pro 13'' late 2013, the person said it had liquid damage and apple said that it would need the following things to get it working again

Display clamshell

top case

logic board

SSD

I bought it because i got it a bit cheap

so i took out the logic board and the ssd and cleaned it, SSD is fine, it works in my air, the LVDS connector on the board and the lcd was burned pretty bad, i replaced the whole lcd with a spare one i had, (has a little crack, i use it for testing), i wasn't expecting it to work but even with the burned LVDS connector ,the lcd lid up to the battery sign, i was very surprised.

The liquid damage was in the lcd connector area only not through out the logic board**

OK, so the problem I'm facing now, is that the macbook only shows the battery sign when i plug in the charger, it doesn't charge the battery and doesn't have any light on the magsafe, so its stuck on the battery sign.

Any suggestions how i can fix this?, I'm good at soldering, i don't want to replace the board as its very expensive.

Thanks

[image|370755|align=left]

[image|370756|align=left]

[image|370757|align=left]

기기:

MacBook Pro 13" Retina Display Late 2013

현황:

-open
+closed

편집자: originalmachead ,

제목:

stuck on battery charging sign not booting into the OS

텍스트:

Hi Everyone!.

So i bought a retina macbook pro 13'' late 2013, the person said it had liquid damage and apple said that it would need the following things to get it working again

Display clamshell

top case

logic board

SSD

I bought it because i got it a bit cheap

so i took out the logic board and the ssd and cleaned it, SSD is fine, it works in my air, the LVDS connector on the board and the lcd was burned pretty bad, i replaced the whole lcd with a spare one i had, (has a little crack, i use it for testing), i wasn't expecting it to work but even with the burned LVDS connector ,the lcd lid up to the battery sign, i was very surprised.

The liquid damage was in the lcd connector area only not through out the logic board**

OK, so the problem I'm facing now, is that the macbook only shows the battery sign when i plug in the charger, it doesn't charge the battery and doesn't have any light on the magsafe, so its stuck on the battery sign.

Any suggestions how i can fix this?, I'm good at soldering, i don't want to replace the board as its very expensive.

Thanks

[image|370755|align=left]

[image|370756|align=left]

[image|370757|align=left]

기기:

MacBook Pro 13" Retina Display Late 2013

현황:

open

편집자: originalmachead ,

제목:

stuck on battery charging sign not booting into the OS

텍스트:

Hi Everyone!.

So i bought a retina macbook pro 13'' late 2013, the person said it had liquid damage and apple said that it would need the following things to get it working again

Display clamshell

top case

logic board

SSD

I bought it because i got it a bit cheap

so i took out the logic board and the ssd and cleaned it, SSD is fine, it works in my air, the LVDS connector on the board and the lcd was burned pretty bad, i replaced the whole lcd with a spare one i had, (has a little crack, i use it for testing), i wasn't expecting it to work but even with the burned LVDS connector ,the lcd lid up to the battery sign, i was very surprised.

The liquid damage was in the lcd connector area only not through out the logic board**

OK, so the problem I'm facing now, is that the macbook only shows the battery sign when i plug in the charger, it doesn't charge the battery and doesn't have any light on the magsafe, so its stuck on the battery sign.

Any suggestions how i can fix this?, I'm good at soldering, i don't want to replace the board as its very expensive.

Thanks

[image|370755|align=left]

[image|370756|align=left]

[image|370757|align=left]

기기:

MacBook Pro 13" Retina Display Late 2013

현황:

open

편집자: Waseem ,

제목:

stuck on battery charging sign not booting into the OS

텍스트:

Hi Everyone!.
So i bought a retina macbook pro 13'' late 2013, the person said it had liquid damage and apple said that it would need the following things to get it working again
Display clamshell
top case
logic board
SSD
I bought it because i got it a bit cheap
-so i took out the logic board and the ssd and cleaned it, SSD is fine, it works in my air, the LVDS connector on the board and the lcd was burned pretty bad, i replaced the whole lcd with a spare one i had, (has a little crack, i use it for testing), i wasn't expecting it to work but even with the burned lids connector the lcd lid up to the battery sign, i was very surprised.
+so i took out the logic board and the ssd and cleaned it, SSD is fine, it works in my air, the LVDS connector on the board and the lcd was burned pretty bad, i replaced the whole lcd with a spare one i had, (has a little crack, i use it for testing), i wasn't expecting it to work but even with the burned LVDS connector ,the lcd lid up to the battery sign, i was very surprised.
The liquid damage was in the lcd connector area only not through out the logic board**
OK, so the problem I'm facing now, is that the macbook only shows the battery sign when i plug in the charger, it doesn't charge the battery and doesn't have any light on the magsafe, so its stuck on the battery sign.
Any suggestions how i can fix this?, I'm good at soldering, i don't want to replace the board as its very expensive.
Thanks
[image|370755|align=left]
[image|370756|align=left]
[image|370757|align=left]

기기:

MacBook Pro 13" Retina Display Late 2013

현황:

open

편집자: Waseem ,

제목:

stuck on battery charging sign not booting into the OS

텍스트:

Hi Everyone!.
So i bought a retina macbook pro 13'' late 2013, the person said it had liquid damage and apple said that it would need the following things to get it working again
Display clamshell
top case
logic board
SSD
I bought it because i got it a bit cheap
-so i took out the logic board and the ssd and cleaned it, SSD is fine, it works in my air, the LVDS connector on the board and the lcd was burned pretty bad, i replaced the whole lcd with a spare one i had, (has a little crack, i use it for testing), i was expecting it to work but even with the burned lids connector the lcd lid up to the battery sign, i was very surprised.
+so i took out the logic board and the ssd and cleaned it, SSD is fine, it works in my air, the LVDS connector on the board and the lcd was burned pretty bad, i replaced the whole lcd with a spare one i had, (has a little crack, i use it for testing), i wasn't expecting it to work but even with the burned lids connector the lcd lid up to the battery sign, i was very surprised.
The liquid damage was in the lcd connector area only not through out the logic board**
OK, so the problem I'm facing now, is that the macbook only shows the battery sign when i plug in the charger, it doesn't charge the battery and doesn't have any light on the magsafe, so its stuck on the battery sign.
Any suggestions how i can fix this?, I'm good at soldering, i don't want to replace the board as its very expensive.
Thanks
-[image|370755]
-[image|370756]
-[image|370757]
+[image|370755|align=left]
+
+[image|370756|align=left]
+
+[image|370757|align=left]

기기:

MacBook Pro 13" Retina Display Late 2013

현황:

open

편집자: Waseem ,

제목:

stuck on battery charging sign not booting into the OS

텍스트:

Hi Everyone!.
So i bought a retina macbook pro 13'' late 2013, the person said it had liquid damage and apple said that it would need the following things to get it working again
Display clamshell
top case
logic board
SSD
I bought it because i got it a bit cheap
so i took out the logic board and the ssd and cleaned it, SSD is fine, it works in my air, the LVDS connector on the board and the lcd was burned pretty bad, i replaced the whole lcd with a spare one i had, (has a little crack, i use it for testing), i was expecting it to work but even with the burned lids connector the lcd lid up to the battery sign, i was very surprised.
+The liquid damage was in the lcd connector area only not through out the logic board**
+
OK, so the problem I'm facing now, is that the macbook only shows the battery sign when i plug in the charger, it doesn't charge the battery and doesn't have any light on the magsafe, so its stuck on the battery sign.
Any suggestions how i can fix this?, I'm good at soldering, i don't want to replace the board as its very expensive.
Thanks
+
+[image|370755]
+[image|370756]
+[image|370757]

기기:

MacBook Pro 13" Retina Display Late 2013

현황:

open

원문 게시자: Waseem ,

제목:

stuck on battery charging sign not booting into the OS

텍스트:

Hi Everyone!.

So i bought a retina macbook pro 13'' late 2013, the person said it had liquid damage and apple said that it would need the following things to get it working again

Display clamshell

top case

logic board

SSD

I bought it because i got it a bit cheap

so i took out the logic board and the ssd and cleaned it, SSD is fine, it works in my air, the LVDS connector on the board and the lcd was burned pretty bad, i replaced the whole lcd with a spare one i had, (has a little crack, i use it for testing), i was expecting it to work but even with the burned lids connector the lcd lid up to the battery sign, i was very surprised.

OK, so the problem I'm facing now, is that the macbook only shows the battery sign when i plug in the charger, it doesn't charge the battery and doesn't have any light on the magsafe, so its stuck on the battery sign.

Any suggestions how i can fix this?, I'm good at soldering, i don't want to replace the board as its very expensive.

Thanks

기기:

MacBook Pro 13" Retina Display Late 2013

현황:

open