주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

도움말

현재 버전 게시자: oldturkey03 ,

텍스트:

LouisJB, let me "pipe up" for a second. First thing I suggest is that you check your charging fusefuse F7040. Use a multimeter and see if you have continuity. If you do not replace it with a 8A 24V 1206 SMC fuse.
LouisJB, let me "pipe up" for a second. First thing I suggest is that you check your charging fusefuse F7040. Use a multimeter and see if you have continuity. If you do not replace it with a 8A 24V 1206 SMC fuse.
 
[image|444980|align=center]
 
Charging is controlled by U7000 which is a ISL6258A It is a 28 pin QFN package,7 solder pads each side. It communicates with the SMC to activate charging and then uses a push-pull FET circuit to generate the charging voltage. There is a current sensing resistor R7050 just at 3 o'clock position from the fuse (the green device) that feeds back the charging current information to U7000. It is a 0.01 ohm 0.5% 1W sensing resistor in a 0612 package.Check those components first and see what you get. You do want to check the components around the charging IC U7000.
 
[image|444977|align=center]

현황:

open

편집자: oldturkey03 ,

텍스트:

LouisJB, let me "pipe up" for a second. First thing I suggest is that you check your charging fuse. Use a multimeter and see if you have continuity. If you do not replace it with a 8A 24V 1206 SMC fuse.
 
[image|444980|align=leftimage|444980|align=center]
[image|444980|align=leftimage|444980|align=center]
 
Charging is controlled by U7000 which is a ISL6258A It is a 28 pin QFN package,7 solder pads each side. It communicates with the SMC to activate charging and then uses a push-pull FET circuit driving an LC network to generate the charging voltage. There is a current sensing resistor R7050 just at 3 o'clock position from the fuse (the green device) that feeds back the charging current information to U7000. It is a 0.01 ohm 0.5% 1W sensing resistor in a 0612 package.Check those components first and see what you get. You do want to check the components around the charging IC U7000.
Charging is controlled by U7000 which is a ISL6258A It is a 28 pin QFN package,7 solder pads each side. It communicates with the SMC to activate charging and then uses a push-pull FET circuit driving an LC network to generate the charging voltage. There is a current sensing resistor R7050 just at 3 o'clock position from the fuse (the green device) that feeds back the charging current information to U7000. It is a 0.01 ohm 0.5% 1W sensing resistor in a 0612 package.Check those components first and see what you get. You do want to check the components around the charging IC U7000.
 
[image|444977|align=leftimage|444977|align=center]
[image|444977|align=leftimage|444977|align=center]

현황:

open

원문 게시자: oldturkey03 ,

텍스트:

LouisJB, let me "pipe up" for a second. First thing I suggest is that you check your charging fuse. Use a multimeter and see if you have continuity. If you do not replace it with a 8A 24V 1206 SMC fuse.

[image|444980|align=left]

Charging is controlled by U7000 which is a ISL6258A It is a 28 pin QFN package,7 solder pads each side. It communicates with the SMC to activate charging and then uses a push-pull FET circuit driving an LC network to generate the charging voltage. There is a current sensing resistor R7050 just at 3 o'clock position from the fuse (the green device) that feeds back the charging current information to U7000. It is a 0.01 ohm 0.5% 1W sensing resistor in a 0612 package.Check those components first and see what you get. You do want to check the components around the charging IC U7000.

[image|444977|align=left]

현황:

open