The moto q is charged via the usb port, the port could normally repaired - but that involves soldering
you wrote that it works when you hold it in a certain angle - sounds ok - but it isn't!
the more you bent it, the more damage could be done
is used a picture from the teardown to show you this:
[image|57676|size=thumbnail]
to fix it, you have to resolder the broken parts - and it would be a good idea to check the 5 usb contacts to the main board - they break if they were bent to often
-
if the picture is to small, use the [http://s1.guide-images.ifixit.net/igi/XttMDV5dOBYKEWYZ.huge|huge]one
+
if the picture is to small, use the [http://s1.guide-images.ifixit.net/igi/XttMDV5dOBYKEWYZ.huge|huge] one
The moto q is charged via the usb port, the port could normally repaired - but that involves soldering
you wrote that it works when you hold it in a certain angle - sounds ok - but it isn't!
the more you bent it, the more damage could be done
is used a picture from the teardown to show you this:
[image|57676|size=thumbnail]
to fix it, you have to resolder the broken parts - and it would be a good idea to check the 5 usb contacts to the main board - they break if they were bent to often
if the picture is to small, use the [http://s1.guide-images.ifixit.net/igi/XttMDV5dOBYKEWYZ.huge|huge]one