주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: Fatulegaee ,

본문:

Here are some possible ways to fix this problem based off of relevant researches,
 
1) There could be some dirt, sand, or small materials blocking the way for the lens to extend so you would need to take a microfiber cloth and clean as much as possible around the lends barrel. Another way could be to forcibly blow out any obstructions around the lens barrel.
 
2) Turn the power off remove batteries and wait one minute then replace the batteries with a brand new set, once this is complete turn the camera back on while holding the functions button (the ok button). Should that not work turn camera back off and remove memory card and repeat the process.
 
3) Plug in the AV (audio/video) cable, the reason so is because this will provide more power for the camera lens to extend and refocus
 
4) Placing the camera on a hard surface, face the lens towards the ceiling, and hold the shutter button while you press the power button. The idea for this process is to try realigning the lens back into their personal slots.
 
[https://www.ifixit.com/Wiki/Nikon_Coolpix_L810_Troubleshooting|Refer[Nikon Coolpix L810 Troubleshooting|For more information click here should any other questions or guides on how to do so, arise.Refer to the troubleshooting page.]]
[https://www.ifixit.com/Wiki/Nikon_Coolpix_L810_Troubleshooting|Refer[Nikon Coolpix L810 Troubleshooting|For more information click here should any other questions or guides on how to do so, arise.Refer to the troubleshooting page.]]

현황:

open

편집 작업: Fatulegaee ,

본문:

Here are some possible ways to fix this problem based off of relevant researches,

http://www.steves-digicams.com/knowledge-center/how-tos/troubleshooting-repair/troubleshoot-a-digital-camera-that-says-lens-error-on-screen.html#b
Here are some possible ways to fix this problem based off of relevant researches,

http://www.steves-digicams.com/knowledge-center/how-tos/troubleshooting-repair/troubleshoot-a-digital-camera-that-says-lens-error-on-screen.html#b
 
1) There could be some dirt, sand, or small materials blocking the way for the lens to extend so you would need to take a microfiber cloth and clean as much as possible around the lends barrel. Another way could be to forcibly blow out any obstructions around the lens barrel.
 
2) Turn the power off remove batteries and wait one minute then replace the batteries with a brand new set, once this is complete turn the camera back on while holding the functions button (the ok button). Should that not work turn camera back off and remove memory card and repeat the process.
 
3) Plug in the AV (audio/video) cable, the reason so is because this will provide more power for the camera lens to extend and refocus
 
4) Placing the camera on a hard surface, face the lens towards the ceiling, and hold the shutter button while you press the power button. The idea for this process is to try realigning the lens back into their personal slots.
 
[https://www.ifixit.com/Wiki/Nikon_Coolpix_L810_Troubleshooting|Refer here should any other questions or guides on how to do so, arise.]

현황:

open

편집 작업: Fatulegaee ,

본문:

Here are some possible ways to fix this problem based off of relevant researches,

http://www.steves-digicams.com/knowledge-center/how-tos/troubleshooting-repair/troubleshoot-a-digital-camera-that-says-lens-error-on-screen.html#b
Here are some possible ways to fix this problem based off of relevant researches,

http://www.steves-digicams.com/knowledge-center/how-tos/troubleshooting-repair/troubleshoot-a-digital-camera-that-says-lens-error-on-screen.html#b
 
1) There could be some dirt, sand, or small materials blocking the way for the lens to extend so you would need to take a microfiber cloth and clean as much as possible around the lends barrel. Another way could be to forcibly blow out any obstructions around the lens barrel.
 
2) Turn the power off remove batteries and wait one minute then replace the batteries with a brand new set, once this is complete turn the camera back on while holding the functions button (the ok button). Should that not work turn camera back off and remove memory card and repeat the process.
 
3) Plug in the AV (audio/video) cable, the reason so is because this will provide more power for the camera lens to extend and refocus
 
4) Placing the camera on a hard surface, face the lens towards the ceiling, and hold the shutter button while you press the power button. The idea for this process is to try realigning the lens back into their personal slots.

현황:

open

편집 작업: Fatulegaee ,

본문:

Here are some possible ways to fix this problemproblem based off of relevant researches,
Here are some possible ways to fix this problemproblem based off of relevant researches,
 
1) There could be some dirt, sand, or small materials blocking the way for the lens to extend so you would need to take a microfiber cloth and clean as much as possible around the lends barrel. Another way could be to forcibly blow out any obstructions around the lens barrel.
 
2) Turn the power off remove batteries and wait one minute then replace the batteries with a brand new set, once this is complete turn the camera back on while holding the functions button (the ok button). Should that not work turn camera back off and remove memory card and repeat the process.
 
3) Plug in the AV (audio/video) cable, the reason so is because this will provide more power for the camera lens to extend and refocus
 
4) Placing the camera on a hard surface, face the lens towards the ceiling, and hold the shutter button while you press the power button. The idea for this process is to try realigning the lens back into their personal slots.

현황:

open

원문 게시자: Fatulegaee ,

본문:

Here are some possible ways to fix this problem,

1) There could be some dirt, sand, or small materials blocking the way for the lens to extend so you would need to take a microfiber cloth and clean as much as possible around the lends barrel. Another way could be to forcibly blow out any obstructions around the lens barrel.

2) Turn the power off remove batteries and wait one minute then replace the batteries with a brand new set, once this is complete turn the camera back on while holding the functions button (the ok button). Should that not work turn camera back off and remove memory card and repeat the process.

3) Plug in the AV (audio/video) cable, the reason so is because this will provide more power for the camera lens to extend and refocus

4) Placing the camera on a hard surface, face the lens towards the ceiling, and hold the shutter button while you press the power button. The idea for this process is to try realigning the lens back into their personal slots.

현황:

open