주요 콘텐츠로 건너뛰기
도움말

원문 게시자: Christopher ,

본문:

Hi Guys,

Thanks so much for this information.

I replaced my ipad mini digitizer with success because of this.

Few issues that I ran into:

1. Incorrect Digitizer. I had the one without the IC and home button.

After getting the correct Screen

2. Powering on LCD gave dim screen. Could see stuff but no back light

- Disconnect & reconnect battery fixed this.

3. Power button sitting faulty. Depressing too deep

- Sticking the old rubber onto the new button helped

- Sticking down the Digitizer to the frame (above the button)... Was not stuck properly onto the frame.

4. Digitizer malfunction. Left, Right, or slow response

- Sticking on the tape from the old screen ribbons. (Button ribbon tapes - 2 pieces). and the very long piece which goes at the bottom of the screen / above the button ribbon ... this stopped the malfunction.

Thanks again people.

Regards

Christopher

현황:

open