주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말

현재 버전 게시자: oldturkey03 (투표 내용) ,

제목:

How can I free the R/H rear screw on back cover that's *Loctite* held
How can I free the R/H rear screw on back cover that's *Loctite* held

텍스트:

I am about to replace the iBook's HDD. Have followed the paginated instructions successfully so far.
I am about to replace the iBook's HDD. Have followed the paginated instructions successfully so far.
 
Now, at the Bottom Cover's rear R/H [long] Torx 8 screw I've hit the wall. My Vanadium T8 s/driver did shift the screw, but only so far, and with the entire assembly turning, the shallow screw head has been gone 'rounded' at driver insert, a double whammy.
 
There seems no way out, or in, and I am truly stuck having the 'captive' nut welded to the case retaining screw.
 
Any valid idea short of destroying my trusty iBook will be supremely appreciated.
Any valid idea short of destroying my trusty iBook will be supremely appreciated.
 
I am sure that this is a very rare occurrence.I regret this lengthy spiel, but am at my 'wits end'. M'aidez, hilfe..
 
Thank you...
 
Balta

NB: The short center and rear L/H screws were both undone without any drama.
Balta

NB: The short center and rear L/H screws were both undone without any drama.
 
NB: The short center and rear L/H screws were both undone without any drama.

기기:

iBook G4 12" 1.33 Ghz

현황:

open

승인된 답변:

26448

편집자: Ben Eisenman ,

제목:

How can I free the R/H rear screw on back cover that's *Loctite* held 

텍스트:

I am about to replace the iBook's  HDD. Have followed the paginated instructions successfully so far. 

Now, at the Bottom Cover's rear R/H [long] Torx 8 screw I've hit the wall. My Vanadium T8 s/driver did shift the screw, but only so far, and with the entire assembly turning, the shallow screw head has been gone 'rounded' at driver insert, a double whammy.

There seems no way out, or in, and I am truly stuck having the 'captive' nut welded to the case retaining screw.

Any valid idea short of destroying my trusty iBook will be supremely appreciated.  

I am sure that this is a very rare occurrence.I regret this lengthy spiel, but am at my 'wits end'. M'aidez, hilfe..

Thank you...

Balta 

NB: The short center and rear L/H screws were both undone without any drama. 

기기:

iBook G4 12" 1.33Ghz 1.33 Ghz
iBook G4 12" 1.33Ghz 1.33 Ghz

현황:

open

원문 게시자: balta ,

제목:

How can I free the R/H rear screw on back cover that's *Loctite* held 

텍스트:

I am about to replace the iBook's  HDD. Have followed the paginated instructions successfully so far. 

Now, at the Bottom Cover's rear R/H [long] Torx 8 screw I've hit the wall. My Vanadium T8 s/driver did shift the screw, but only so far, and with the entire assembly turning, the shallow screw head has been gone 'rounded' at driver insert, a double whammy.

There seems no way out, or in, and I am truly stuck having the 'captive' nut welded to the case retaining screw.

Any valid idea short of destroying my trusty iBook will be supremely appreciated.  

I am sure that this is a very rare occurrence.I regret this lengthy spiel, but am at my 'wits end'. M'aidez, hilfe..

Thank you...

Balta 

NB: The short center and rear L/H screws were both undone without any drama. 

기기:

iBook G4 12" 1.33Ghz 

현황:

open