주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: Dan ,

본문:

The problem is you can't see them without fully pulling the logic board out. If you have a small mirror you can see them.
 
* The bottom connector set is two side by side connectors for the HD (discreet SATA & Power) {Port 0}.
* The next one up is the optical drive combo SATA/Power cable {Port 1}
* And the top most is the SSD combo SATA/Power cable {Port 2}.
* And the top most is the SSD combo SATA/Power cable {Port 2}.
 
If someone worked on your system before they could have put the optical drive cable into the wrong SATA port the system doesn't care which of the two combo ports you have what.

현황:

open

원문 게시자: Dan ,

본문:

The problem is you can't see them without fully pulling the logic board out. If you have a small mirror you can see them.

* The bottom connector set is two side by side connectors for the HD (discreet SATA & Power) {Port 0}. 
* The next one up is the optical drive combo SATA/Power cable {Port 1} 
* And the top most is the SSD combo cable {Port 2}.

If someone worked on your system before they could have put the optical drive cable into the wrong SATA port the system doesn't care which of the two combo ports you have what.

현황:

open