주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

도움말

현재 버전 게시자: Rany ,

텍스트:

Hi,
 
If David's solution doesn't solve it, the connector on the board has to be replaced.
 
Since it is hard to source a good connector if at all (probably demand is not high enough, so suppliers don't make them/offer them), we choose sometimes to microsolder the connector directly to the board.

You can approach your local repair shops to ask if they offer these services (in-store or outsource). Otherwise
It's a few contributors on iFixit offer these types of services. Check out my profile or jessabethany's. You can establish contact through there for an estimate. In our casehack, but it's a same day turnaround jobpractical and it works.
Since it is hard to source a good connector if at all (probably demand is not high enough, so suppliers don't make them/offer them), we choose sometimes to microsolder the connector directly to the board.

You can approach your local repair shops to ask if they offer these services (in-store or outsource). Otherwise
It's a few contributors on iFixit offer these types of services. Check out my profile or jessabethany's. You can establish contact through there for an estimate. In our casehack, but it's a same day turnaround jobpractical and it works.

현황:

open

원문 게시자: Rany ,

텍스트:

Hi,

If David's solution doesn't solve it, the connector on the board has to be replaced.

Since it is hard to source a good connector if at all (probably demand is not high enough, so suppliers don't make them/offer them), we choose sometimes to microsolder the connector directly to the board.

You can approach your local repair shops to ask if they offer these services (in-store or outsource). Otherwise a few contributors on iFixit offer these types of services. Check out my profile or jessabethany's. You can establish contact through there for an estimate. In our case it's a same day turnaround job.

현황:

open