메인 콘텐츠로 스킵하기
도움말

원문 게시자: oldturkey03 ,

본문:

I agree with Dan on this one. I strongly suggest that you either try and repair your board, or worst case scenario, replace. I recently repaired a fan connector with tore off solder pads but attaching the wires to the traces that lead to the connector. You will need to carefully expose the copper of the traces (I used a scalpel and a microscope for that). Then solder some very fine wire to those traces. I used left over wiring from an old LVDS cable. Two strands of it will do. Connect those to the fan. Attach some images of your damaged solder pads etc with your question might help. That way we can see what you see.

현황:

open