주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: Sam Goldheart ,

본문:

When there is ticking sound, mean there is shorted conductor(s) on the circuit board. The cap that you suggested as culprit can only be tested with ESR meter to know either they still good or not. Look around where the sound is coming from with the aid of magnifying glass to clearly see and test any available smd conductors.
 
Have a good luck. You can also check www.knowntech.wordpress.com for tips.
Have a good luck. You can also check www.knowntech.wordpress.com for tips.

현황:

open

편집 작업: Sam Goldheart (투표 내용) ,

본문:

When there is ticking sound, mean there is shorted conductor(s) on the circuit board. The cap that you suggested as culprit can only be tested with ESR meter to know either they still good or not. Look around where the sound is coming from with the aid of magnifying glass to clearly see and test any available smd conductors.

Have a good luck.  You can also check www.knowntech.wordpress.com for tips.

현황:

deletedopen
deletedopen

편집 작업: iRobot ,

본문:

When there is ticking sound, mean there is shorted conductor(s) on the circuit board. The cap that you suggested as culprit can only be tested with ESR meter to know either they still good or not. Look around where the sound is coming from with the aid of magnifying glass to clearly see and test any available smd conductors.

Have a good luck.  You can also check www.knowntech.wordpress.com for tips.

현황:

opendeleted
opendeleted

원문 게시자: knowntech1 ,

본문:

When there is ticking sound, mean there is shorted conductor(s) on the circuit board. The cap that you suggested as culprit can only be tested with ESR meter to know either they still good or not. Look around where the sound is coming from with the aid of magnifying glass to clearly see and test any available smd conductors.

Have a good luck.  You can also check www.knowntech.wordpress.com for tips.

현황:

open