Skip to main content
도움말

원문 게시자: oldturkey03 ,

본문:

VIP I, check on this. "Fake" charging or not charging is usually caused by a failed/damaged charging coil. Check for any physical damage, or if you have the knowledge and tools, check for function. You want to start by checking 3 inductors. For that, of course, you need a multimeter, or at least an ohm meter, to check for continuity. I hate to refer to those as fuses, but they most certainly control part of the charging circuit. First one is reference designator L3, it is a FERR-120-OHM-1.5A inductor. L4, right below it , has the identical value. Next would be the charger inductor L28 2.2UH-1.8A-155MOHM. All of these are pretty much available at mouser. com or digikey.com. Check the Diode D604, located just above L28.  Hope this helps, good luck.

[image|257861|align=center]

[image|257862|align=center]

[image|257865|align=center]

현황:

open