주요 콘텐츠로 건너뛰기
도움말

원문 게시자: Mrdeanogray ,

본문:

I had this problem I changed the button and now no longer have this problem. Any other fix is a temperary  fix. Unfortunately it's a difficult fix if you don't have the right equipment. For those that do add additional standard solder to the solder joints and then use  two soldering irons to heat up all the switch solder points at the same time and remove the faulty button. Add more standard solder to the switch pads to lower the melting point and then remove with solder wick. Use amicro scope and fine tip soldering iron to solder the new switch in place. I would avoid using hot air as its very easy to over heat and damage these switches.

현황:

open