Skip to main content

원문 게시자: Seth McMichael ,


Sorry, i  did not take any pictures while taking it apart.  But, let me see if i can remember.

First take out the 4 screws that you can see. Next i believe i used a small flat head screw driver and pried around the plastic part where the button is. Now when you do this it will probably brake  the plastic clips but thats ok, i used a dab of super glue to keep them together after testing and putting back together.  After you get in you are on your own, i forgot at this point what i did exactly.

Just use a toothbrush and alcohol and try and clean the corrosion from the water the best you can. If you get stuck send me a pic and i can see if it helps me remember what i did.

Good luck!