원문 게시자: Brandon ,
Again, as with your other question... I'm guessing that since you have this issue...and you're posting on here that you have good access to a solid, workable device. If so... You are going to need to remove the logic board, plain and simple. You are going to need a set of the smaller phillips head screw drivers as well as some torx screw drivers... likely T5 or T6. To best get this done, follow the directions found here: [guide|10766] Also, iFixit has a few great repair kits. I've had to do this multiple times with multiple notebooks. I suggest 100% to get a kit that has the static wrist band. Other than that... use a bit of common sense to be careful with the board... and you'll be fine. It's really not as difficult as we make ourselves think that it is. It's best to make a diagram of what went where, including screws, if this is your first logic board removal.