메인 컨텐츠로 가기
도움말

원문 게시자: oldturkey03 ,

본문:

Danny Griffith  the drying off is just not good enough. you will have to disassemble it and clean the circuit boards with some 90+% isopropyl alcohol and a soft brush to displace all the water etc. Then you will need to replace the battery. It is a must to do that. Once you did all that, re-evaluate and see what happens. It is possible that you shortcircuited the board through the water damage. Any component on the board may have failed, so you will have to take a real close look and see if you can visualize any damaged component. Use [[Topic:Beats Pill 1.0|these guides]] to work on it.

현황:

open