물건을 수리하세요 커뮤니티 상점
도움말

현재 버전 작성자: sinisa1hr

텍스트:

-i do not know if you try it,but put battery inside,put usb cable in ,connect it to PC ..(try to use usb 3.0)
+i do not know if you try it,but put battery inside,put usb cable in ,connect it to PC ..(1st try to use usb 3.0)
and maybe your camera will switch on..idea is based on that some model of Fuji camera have inside firmware option to choose what type of battery is used..as if selection is set to wrong type,then camera will not switch on. Well,to pass that we will connect camera to pc ,to see if respond ,and even after some time usually can be can be turned on in many cases,or even batteries can be charged(depends of choice of batteries), but really is worth to try to see if camera will respond when is connected to pc..

현황:

open

편집자: sinisa1hr

텍스트:

i do not know if you try it,but put battery inside,put usb cable in ,connect it to PC ..(try to use usb 3.0)
-and maybe your camera will switch on..idea is based on that some model of Fuji camera have inside firmware option to choose what type of battery is used..as you know selection is to wrong type,then camera will not switch on. Well connected to pc ,can be turned on in many cases,or even batteries can be charged(depends of choice of batteries), but really is worth to try to see if camera will respond when is connected to pc..
-
-then is possible to turn it on,to check in menu ,that right type of batteries is chosen..
+and maybe your camera will switch on..idea is based on that some model of Fuji camera have inside firmware option to choose what type of battery is used..as if selection is set to wrong type,then camera will not switch on. Well,to pass that we will connect camera to pc ,to see if respond ,and even after some time usually can be can be turned on in many cases,or even batteries can be charged(depends of choice of batteries), but really is worth to try to see if camera will respond when is connected to pc..

현황:

open

원본 게시물 작성자: sinisa1hr

텍스트:

i do not know if you try it,but put battery inside,put usb cable in ,connect it to PC ..(try to use usb 3.0)

and maybe your camera will switch on..idea is based on that some model of Fuji camera have inside firmware option to choose what type of battery is used..as you know selection is to wrong type,then camera will not switch on. Well connected to pc ,can be turned on in many cases,or even batteries can be charged(depends of choice of batteries), but really is worth to try to see if camera will respond when is connected to pc..

then is possible to turn it on,to check in menu ,that right type of batteries is chosen..

현황:

open