주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

도움말

현재 버전 게시자: Eliseu Oliveira ,

제목:

Fastboot Erro "Fastboot Reason: Falied to inicialize partition table"

텍스트:

SPEAKING FOLKS Firmness ? STAND WITH A MOTO G 1 GENERATION , I WENT TO UNLOCK The BOOTLOADER AND NOW IT ONLY ON THE Fastboot SCREEN WITH THIS NEXT ERROR ,
 
" Fastboot Reason: falied to boot partition table " Already Tried Installing A ROM BY Fastboot NOT THE RIGHT OF THIS NEXT ERROR IN ALL
 
THE COMMAND LINES "failed (remote) " . THE FIRST COMMAND " flash partition mfastboot.exe gpt.bin " IT 'S THE FOLLOWING ERROR ,
 
''''''target max-sparse-size: 256MB
 
sending 'partition' (32 KB)...
 
OKAY [ 0.024s]
 
writing 'partition'...
 
(bootloader) This may take a few seconds, if a
 
(bootloader) different partition table is being
 
(bootloader) flashed since we need to backup
 
(bootloader) and restore a few partitions
 
(bootloader) Flashing primary GPT image...
 
(bootloader) Failed to write primary GPT.
 
(bootloader) Failed to program partition table
 
FAILED (remote failure)
 
finished. total time: 5.277s'''
 
'''
 
AND IN OTHER LINES OF COMMAND "FAILED (remote failure ) ," JA USED RSD Lite , have USED THE COMMAND " mfastboot oem fb_mode_clear "
 
BUT WHEN WILL UNLOCK The Bootload THE NEW ERROR SOMEONE I COULD HELP ME ?
 
I tried to downgrade to 4.4.4 kit kat most still can not install nor a firmeware on bike g and also tried to install the 5.1 version of the same thing.


desulpe the English but I'm from Brazil I'm still learning.
I tried to downgrade to 4.4.4 kit kat most still can not install nor a firmeware on bike g and also tried to install the 5.1 version of the same thing.


desulpe the English but I'm from Brazil I'm still learning.

기기:

Motorola Moto G 1st Generation

현황:

open

원문 게시자: Eliseu Oliveira ,

제목:

Fastboot Erro "Fastboot Reason: Falied to inicialize partition table"

텍스트:

SPEAKING FOLKS Firmness ? STAND WITH A MOTO G 1 GENERATION , I WENT TO UNLOCK The BOOTLOADER AND NOW IT ONLY ON THE Fastboot SCREEN WITH THIS NEXT ERROR ,

" Fastboot Reason: falied to boot partition table " Already Tried Installing A ROM BY Fastboot NOT THE RIGHT OF THIS NEXT ERROR IN ALL

THE COMMAND LINES "failed (remote) " . THE FIRST COMMAND " flash partition mfastboot.exe gpt.bin " IT 'S THE FOLLOWING ERROR ,

''''''target max-sparse-size: 256MB

sending 'partition' (32 KB)...

OKAY [  0.024s]

writing 'partition'...

(bootloader) This may take a few seconds, if a

(bootloader) different partition table is being

(bootloader) flashed since we need to backup

(bootloader) and restore a few partitions

(bootloader) Flashing primary GPT image...

(bootloader) Failed to write primary GPT.

(bootloader) Failed to program partition table

FAILED (remote failure)

finished. total time: 5.277s'''

'''

AND IN OTHER LINES OF COMMAND "FAILED (remote failure ) ," JA USED RSD Lite , have USED THE COMMAND " mfastboot oem fb_mode_clear "

BUT WHEN WILL UNLOCK The Bootload THE NEW ERROR SOMEONE I COULD HELP ME ?

I tried to downgrade to 4.4.4 kit kat most still can not install nor a firmeware on bike g and also tried to install the 5.1 version of the same thing.

기기:

Motorola Moto G 1st Generation

현황:

open