주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: rdklinc ,

본문:

Personally I would run both the board and the I/O board through my ultrasonic cleaner. There's probably still gunk/corrosion on the board causing these issues.
Personally I would run both the board and the I/O board through my ultrasonic cleaner. There's probably still gunk/corrosion on the board causing these issues.
 
If the board or I/O board hashave been damaged, an ultrasonic cleaning won't help, but the first step is to remove the gunk and verify that's not the problem.
If the board or I/O board hashave been damaged, an ultrasonic cleaning won't help, but the first step is to remove the gunk and verify that's not the problem.

현황:

open

원문 게시자: rdklinc ,

본문:

Personally I would run both the board and the I/O board through my ultrasonic cleaner.  There's probably still gunk/corrosion on the board causing these issues.

If the board or I/O board has been damaged, an ultrasonic cleaning won't help, but the first step is to remove the gunk and verify that's not the problem.

현황:

open