주요 콘텐츠로 건너뛰기
도움말

원문 게시자: Jade ,

텍스트:

I imagine you are talking about the power connector, which can be seen in this photo:

http://guide-images.ifixit.net/igi/5WFTBBBydtHHsdRY.huge

... bottom right, immediately below the vibration motor.

It's a surface mount component.  If the board where it connects, and the loose power socket, are both undamaged, it probably could be resoldered back on with a hot air gun and a lot of care, much like soldering in SM IC's. A soldering iron will not be able to do this, it will just mess everything up.  If you don't have the tools to repair this, a good repair shop could do it for you.

err, here is an amateur showing how it's done.

http://www.youtube.com/watch?v=yhhLyxkTVQI

현황:

open