주요 콘텐츠로 건너뛰기
도움말

현재 버전 게시자: oldturkey03 (투표 내용) ,

제목:

Why full speed Fan and loudly iMac 27 mid 2011

본문:

Hi Please I need Help !
 
long story , I took my Imac to apple care for replacing Video card because the vertical green line conman issue . then after they replace it , it work fine .
 
problem start when I try to upgrade HDD with New HDD .
 
I did replace the HDD then I finished reconnected all the cable of LCD. when I turn my Imac I smell something got burned !
 
I found out the connector (molex ) of the Display Port Power Cable got burned and also one small chip below the connector too .
 
so I disconnect all the cables of LCD, I did reattach the old Original Apple HDD , I contact my Imac Via TV by HDMI Cable , it work fine bootable I reached my desktop file . ! but the Fan work Loudly and full speed .
 
- I installed ( HDD Fan Control ) application it show , HDD 1024 PRM , ODD 3234 PRM , this app couldn't solve the problem or control the Fan I tried all option of app Auto, Manual, Smart .
 
- Idid SMC reset and PRAM reset nothing solve
- Idid SMC reset and PRAM reset nothing solve
 
a) my question first : is there hope to use LCD which option I must go with on this case :
 
1- got new Display Port Power Cable only !
 
2- replace the cable + connector (molex) + the small chip
 
3- replace the logic bored
 
B) my second question : I can live with Via Monitor rather than using LCD but
 
how I will solve the problem of full speed loudly fan !
 
I wonder if the burned chip could effect the logic board .
 
I did attach Photo on the Link below :
 
[image|1020005]
 
Notice : done SMC reset and PRAM reset nothing solve
 
Notice : done SMC reset and PRAM reset nothing solve
Thank you for your time anything will be helpful

기기:

Imac27 Mid 2011

현황:

open

승인된 답변:

376057

편집 작업: Mr. MAC ,

제목:

Why full speed Fan and loudly iMac 27 mid 2011

본문:

Hi Please I need Help !
 
long story , I took my Imac to apple care for replacing Video card because the vertical green line conman issue . then after they replace it , it work fine .
 
problem start when I try to upgrade HDD with New HDD .
 
I did replace the HDD then I finished reconnected all the cable of LCD. when I turn my Imac I smell something got burned !
 
I found out the connector (molex ) of the Display Port Power Cable got burned and also one small chip below the connector too .
 
so I disconnect all the cables of LCD, I did reattach the old Original Apple HDD , I contact my Imac Via TV by HDMI Cable , it work fine bootable I reached my desktop file . ! but the Fan work Loudly and full speed .
 
I- I installed ( HDD Fan Control ) itapplication it show , HDD 1024 PRM , ODD 3234 PRM , this app couldn't solve the problem or control the Fan I tried all option of app Auto, Manual, Smart .

- Idid SMC reset and PRAM reset nothing solve
I- I installed ( HDD Fan Control ) itapplication it show , HDD 1024 PRM , ODD 3234 PRM , this app couldn't solve the problem or control the Fan I tried all option of app Auto, Manual, Smart .

- Idid SMC reset and PRAM reset nothing solve
 
a) my question first : is there hope to use LCD which option I must go with on this case :
 
1- got new Display Port Power Cable only !
 
2- replace the cable + connector (molex) + the small chip
 
3- replace the logic bored
 
B) my second question : I can live with Via Monitor rather than using LCD but
 
how I will solve the problem of full speed loudly fan !
 
I wonder if the burned chip could effect the logic board .
 
I did attach Photo on the Link below :
 
[image|1020005]
 
 
Notice : done SMC reset and PRAM reset nothing solve
Thank you for your time anything will be helpful

기기:

Imac27 Mid 2011

현황:

open

편집 작업: Mr. MAC ,

제목:

Why full speed Fan and loudly iMac 27 mid 2011
Why full speed Fan and loudly iMac 27 mid 2011

본문:

Hi Please I need Help !
 
long story , I took my Imac to apple care for replacing Video card because the vertical green line conman issue . then after they replace it , it work fine .
 
problem start when I try to upgrade HDD with New HDD .
 
I did replace the HDD then I finished reconnected all the cable of LCD. when I turn my Imac I smell something got burned !
 
I found out the connector (molex ) of the Display Port Power Cable got burned and also one small chip below the connector too .
 
so I disconnect all the cables of LCD, I did reattach the old Original Apple HDD , I contact my Imac Via TV by HDMI Cable , it work fine bootable I reached my desktop file . ! but the Fan work Loudly and full speed .
 
I installed ( HDD Fan Control ) it show , HDD 1024 PRM , ODD 3234 PRM , this app couldn't solve the problem or control the Fan I tried all option of app Auto, Manual, Smart .
 
a) my question first : is there hope to use LCD which option I must go with on this case :
 
1- got new Display Port Power Cable only !
 
2- replace the cable + connector (molex) + the small chip
 
3- replace the logic bored
 
B) my second question : I can live with Via Monitor rather than using LCD but
 
how I will solve the problem of full speed loudly fan !
 
I wonder if the burned chip could effect the logic board .
 
I did attach Photo on the Link below :
 
[image|1020005[image|1020005]
[image|1020005[image|1020005]
 
Thank you for your time anything will be helpful

기기:

Imac27 Mid 2011

현황:

open

편집 작업: Mr. MAC ,

제목:

Why full speed Fan and loudly

본문:

Hi Please I need Help !
 
long story , I took my Imac to apple care for replacing Video card because the vertical green line conman issue . then after they replace it , it work fine .
 
problem start when I try to upgrade HDD with New HDD .
 
I did replace the HDD then I finished reconnected all the cable of LCD. when I turn my Imac I smell something got burned !
 
I found out the connector (molex ) of the Display Port Power Cable got burned and also one small chip below the connector too .
 
so I disconnect all the cables of LCD, I did reattach the old Original Apple HDD , I contact my Imac Via TV by HDMI Cable , it work fine bootable I reached my desktop file . ! but the Fan work Loudly and full speed .
 
I installed ( HDD Fan Control ) it show , HDD 1024 PRM , ODD 3234 PRM , this app couldn't solve the problem or control the Fan I tried all option of app Auto, Manual, Smart .
 
a) my question first : is there hope to use LCD which option I must go with on this case :
 
1- got new Display Port Power Cable only !
 
2- replace the cable + connector (molex) + the small chip
 
3- replace the logic bored
 
B) my second question : I can live with Via Monitor rather than using LCD but
 
how I will solve the problem of full speed loudly fan !
 
I wonder if the burned chip could effect the logic board .
 
I did attach Photo on the Link below :
 
[https://forums.macrumors.com/proxy.php?image=https%3A%2F%2Fdiscussions.apple.com%2Fservlet%2FJiveServlet%2FdownloadImage%2F811733%2Fmolex.JPG&hash=9f0790feacbcaa554f5bf17ef7d30edb|molex Logic board [image|1020005]
[https://forums.macrumors.com/proxy.php?image=https%3A%2F%2Fdiscussions.apple.com%2Fservlet%2FJiveServlet%2FdownloadImage%2F811733%2Fmolex.JPG&hash=9f0790feacbcaa554f5bf17ef7d30edb|molex Logic board [image|1020005]
 
Thank you for your time anything will be helpful

기기:

Imac27 Mid 2011

현황:

open

원문 게시자: Mr. MAC ,

제목:

Why full speed Fan and loudly

본문:

Hi Please I need Help !

long story , I took my Imac to apple care for replacing Video card because the vertical green line conman issue . then after they replace it , it work fine .

problem start when I try to upgrade HDD with New HDD .

I did replace the HDD then I finished reconnected all the cable of LCD. when I turn my Imac I smell something got burned !

I found out the connector (molex ) of the Display Port Power Cable got burned and also one small chip below the connector too .

so I disconnect all the cables of LCD, I did reattach the old Original Apple HDD , I contact my Imac Via TV by HDMI Cable , it work fine bootable I reached my desktop file . ! but the Fan work Loudly and full speed .

I installed ( HDD Fan Control ) it show , HDD 1024 PRM , ODD 3234 PRM , this app couldn't solve the problem or control the Fan I tried all option of app Auto, Manual, Smart .

a) my question first : is there hope to use LCD which option I must go with on this case :

1- got new Display Port Power Cable only !

2- replace the cable + connector (molex) + the small chip

3- replace the logic bored

B) my second question : I can live with Via Monitor rather than using LCD but

how I will solve the problem of full speed loudly fan !

I wonder if the burned chip could effect the logic board .

I did attach Photo on the Link below :

[https://forums.macrumors.com/proxy.php?image=https%3A%2F%2Fdiscussions.apple.com%2Fservlet%2FJiveServlet%2FdownloadImage%2F811733%2Fmolex.JPG&hash=9f0790feacbcaa554f5bf17ef7d30edb|molex Logic board]

Thank you for your time anything will be helpful

기기:

Imac27 Mid 2011

현황:

open